HomeMy WebLinkAboutBid•
State of California Business, Transpcttation and Housing Agency
Memorandum
Date: August 29, 2012
To: Department of General Services
Procurement Division
From: DEPARTMENT OF CALIFORNIA fTIGHWAY PATROL
Fleet Operations Section
File No.: 074.10480.10480.Utility Vehicle
Subject: ENFORCEMENT VEHICLE CONTRACT
The California Highway Patrol has completed driving related testing on both the Ford Utility and
Sedan Police Interceptor. Both vehicles passed enforcement related compliance testing (speeds,
acceleration and braking). The California Highway Patrol (i.e., PSCO) has completed radio
related testing on the Ford Utility Police Interceptor. While PSCO has identified potential
degradation concerns, the California Highway Patrol has waived the no more than 1 db
degradation and accepts the Ford Utility Police Interceptor as tested.
In summary, both the Ford Sedan and Utility Police interceptor vehicles tested for compliance
with the specifications outlined in the California Highway Patrol Enforcement Vehicle Contract
have passed and are accepted.
If you have any questions or need additional information, do not hesitate to contact me at
(916) 376-3500.
W. A. PETERS, Captain
Commander
Safety, Service, and Security
CHP 51 (Rev, 03-11) OPJ 075
An Internationally Accredited Agency
DESGENERAL SE VICE"
Governor Edmund G. Brow, » ,
June 11, 2012 CERTIFIED MAIL -
RETURN RECEIPT REQUESTED
Mr. Dan Raimondi
Folsom Lake Ford
12755 Folsom Blvd.
Folsom, CA 95630
Subject: Contract Number 1-12-23-14, Award Notification
Dear Mr. Raimondi:
We are pleased to accept your bid for Solicitation Number IFB DOS 1009-014. The resulting
contract information is as follows:
ENFORCEMENT VEHICLE, POLICE PURSUIT
Contract No.:1-12-23-14
Lines Awarded: SEDAN & UTILITY VEHICLES
Total Evaluated Amount: $43,704,477.50
Effective: 5/2512012 through 5124/2014
The contract consists of this acceptance letter, your bid, the State's Invitation for Bid (IFB) and
the State's General Provisions.
The Contract User Instructions will be posted on the Department of General Services
eProcurement system at www.bidsvnc.com . A copy of this notification is being sent to you so
that you will know the exact information which has been transmitted to the departments.
In accordance with the State's general provisions, Article #35 entitled News Releases, the
Contractor shall not publish or use any information concerning this Statewide Contractin any
format or media for advertising or publicity without prior written consent from the State's Contract
Administrator.
If you have any questions regarding this contract, please contact Timothy Smith at
(916) 375-4451.
Sincerely,
Timothy Smith
State Contract Administrator
Contracts Management Unit 2
cc. Contract 1-12-23-14
PROCUREMENT DIVISION j State of California 'State Consumer Services Agency
707 3rd Street 8th floor I West Sacramento, CA 95605 11916.375 4400 f 916,375,4613
Department of General Services
Procurement Division
707 Third Street, 2nd Floor
West Sacramento, CA 95605-2811
State of California
CONTRACT USER INSTRUCTIONS
****MANDATORY****
r CONTRACT NUMBER: 1-12-23-14
DESCRIPTION: ENFORCEMENT VEHICLES, SEDAN
& UTILITY
CONTRACTOR(S): FOLSOM LAKE FORD
CONTRACT TERM: 5/25/2012 through 5/24/2014
STATE CONTRACT Timothy Smith
ADMINISTRATOR: (916) 375-4451
timothy.smith(a'}_dgs.eac ov_
The contract user instructions, products, and pricing are included herein. AD purchase documents
issued under this contract incorporate the contract terms and applicable California General Provisions.
Original Signature on File
Timothy Smith, Contract Administrator
Date: 5/25/2012
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatory) No: 1-1243-14
Contract User Instructions
1. SCOPE:
The State's contract with Folsom Lake Ford (Contractor) provides 2013 or current model year Enforcement
Vehicles at contracted pricing to the State of California and local governmental agencies in accordance with
the requirements of Contract # 1-12-23-14. The Contractor shall supply the entire portfolio of products as
identified in the contract and will be the primary point of contact for data collection, reporting, and distribution
of Enforcement Vehicles to the State.
The contract term is for two (2) years with an option to extend the contract for one additional 1 year period or
portion thereof. The terms, conditions, and prices for the contract extension option shall be by mutual
agreement between the Contractor and the State. If a mutual agreement cannot be met the contract may be
terminated at the end of the current contract term.
If the manufacturer's cut-off date occurs prior to the contract expiration date, the dealer may offer the
contracted or subsequent model year meeting or exceeding the contract specifications at the same contract
terms, conditions, and pricing, after the manufacturer's order cut-off date for the remaining contract period or
portion thereof. The Contractor shall notify the DGS State Contract Administrator in wilting of its intention to
participate in this roll-over provision, shall specify the model year(s) offered, and shall specify the period
through which it will continue to offer vehicles under this provision. This offer shall be irrevocable once
accepted by the State.
2. CONTRACT USAGE/RULES:
A. State Departments
• The use of this contract is mandatory for all State of California departments.
• Ordering departments must adhere to all applicable State laws, regulations, policies, best
practices, and purchasing authority requirements, e.g. California Codes, Code of Regulations,
State Administrative Manual, Management Memos, and State Contracting Manual Volume 2 and
3, as applicable.
• Prior to placing orders against this contract, departments must have been granted non -IT purchasing
authority by the Department of General Services, Procurement Division (DGS/PD) for the use of this
statewide contract. The department's current purchasing authority number must be entered in the
appropriate location on each purchase document. Departments that have not been granted
purchasing authority by DGS/PD for the use of the State's statewide contracts may access the
Purchasing Authority Application at http:/fwww.dgs.ca.gov/pd/Resources/publications/SCM2.aspx or
may contact DGS/PD's Purchasing Authority Management Section by e-mail at pams(a7dcis.ca.gov.
• Departments must have a Department of General Services (DGS) agency billing code prior to
placing orders against this contract. Ordering departments may contact their Purchasing Authority
contact or their department's fiscal office to obtain this information.
B. Local Governmental Agencies
• Local governmental agency use of this contract is optional. Local government agencies are
defined as "any city. county, city and county, district or other governmental body or corporation,
including the California State Universities (CSU) and University of California (UC) systems, K-12
schools and community colleges", empowered to expend public funds for the acquisition of
products, per Public Contract Code Chapter 2, Paragraph 10298 (a) (b). While the State makes
this contract available to local governmental agencies, each local governmental agency should
determine whether this contract is consistent with its procurement policies and regulations.
Contract 1-12-23-14 Page 2 5/25/2012
User Instructions
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (M ) No: 1.1223-14
Contract User Instructions
• Local governmental agencies shall have the same rights and privileges as the State under the
terms of this contract. Any agencies desiring to participate shall be required to adhere to the same
responsibilities as do State agencies and have no authority to amend, modify or change any
condition of the contract.
• Local governmental agencies must have a DGS agency billing code prior to placing orders against
this contract. DGS agency billing codes may be obtained by emailing the DGS billing code contact
with the following information:
o Local governmental agency
o Contact name
o Telephone number
o Mailing address
o Facsimile number and e-mail address
DGS Billing Code Contacts: Marilvn.ebertados.ca..gov or Wilson.lee(a7dgs.ca.gov
C. Unless otherwise specified within this document, the term "ordering agencies" will refer to all State
departments and/or local governmental agencies eligible to utilize this contract. Ordering and/or usage
instructions exclusive to State departments or local governmental agencies shall be identified within each
article.
3. DGS ADMINISTRATIVE FEES:
A. State Departments
The DGS will bill each State department an administrative fee for use of this statewide contract. The
administrative fee should NOT be included in the order total, nor remitted before an invoice is received
from DGS.
Current fees are available online in the Procurement Division Price Book located at:
htto://www.dos.ca.gov/ofs/Resources/Pricebook.asox. (Click on 'Purchasing' under Procurement Division.)
B. Local Governmental Agencies
For all local government agency transactions issued against the contract the Contractor is required to
remit the DGS/PD an Incentive Fee of an amount equal to 1 % of the total purchase order amount
excluding taxes and freight. This Incentive Fee shall not be included in the agency's purchase price,
nor invoiced or charged to the purchasing entity. All prices quoted to local governmental agency
customers shall reflect State contract pricing, including any and all applicable discounts, and shall
include no other add -on fees.
4. CONTRACT ADMINISTRATION:
Both the State and the Contractor have assigned Contract Administrators as the single points of contact for
problem resolution and related contract issues and questions. The table on the next page contains the
points of contact for this contract:
Contract 1-12-23-14 Page 3 5/25/2012
User instructions
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (N aeida ) No: 1-13-14
Contract User Instructions
Administrator .,
Information
.... , . DeSfPt i
mate Contract Administrator) ..
POlsom Laice: Ford
: ' (`Co 't c tor)' . .
Contact. Name:
Timothy Smith
Dan Raimondi or Mark Paoli
Telephone:
(916) 375-4451
(916) 351-4246 / (916) 351-4202
Facsimile;
(916) 375-4613
(916) 353-2078 / (916) 353-2078
Email:
timoth.smity22L9_s.ca.Qov
danr(it folsomiakeford.com
Folsom Lake Ford
Attn: Dan Raimondi or Mark Paoli
Address:
DGS — Procurement Division
Attn: Timothy Smith
Enforcement Vehicle Contract
Administrator
707 Third Street, 2nd Floor, MS 201
West Sacramento, CA 95605
12755 Folsom Blvd.
Folsom, CA 95630
5. PROBLEM RESOLUTION/SUPPLIER PERFORMANCE:
Ordering agencies and/or Contractor shall inform the State Contract Administrator of any technical or
contractual difficulties encountered during contract performance in a timely manner. This includes and is not
limited to informal disputes, supplier performance, outstanding deliveries, etc.
For Contractor performance issues, ordering agencies must submit a completed Supplier Performance
Report via email or facsimile to the State Contract Administrator identified in Article 4 (Contract
Administration). The ordering agency should include all relevant information and/or documentation (i.e.
Purchase documents).
6. CONTRACT ITEMS:
The following two (2) vehicles are available for purchase under this contract:
ENFORCEMENT SEDAN — Ford Police Interceptor Sedan
ENFORCEMENT UTILITY — Ford Police Interceptor Utility Vehicle
No other Ford vehicles are available for purchase under these contract terms.
7. COLOR CHART:
A color chart shall be made available to all ordering agencies, upon written request to the Contractor, for the
make/model year(s) included in this contract.
8. DEALER'S CATALOG:
A copy of the Contractor's Dealer Catalog is available for ordering agencies to review and is a part of these
user instructions as Attachment D. Only items listed in the Dealer Catalog are available for purchase under
this contract. The discount percentage offered for all options in the Dealer Catalog is set at 5%.
The Contractor may submit an updated Dealer Catalog on a quarterly basis and will be available to ordering
agencies once approved by the State Contract Administrator listed in Article 4.
Contract 1-12-23-14
User Instructions
Page 4 5/25/2012
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatory)No: 1•12 : -14
Contract User Instructions
9. SPECIFICATIONS:
All items listed on Attachment A — Contract Pricing, shall conform to the following State of California Bid
Specifications:
Attachment B1 - 2310-1951, dated 3/14/2012
Sedan
Attachment B2 - 2310-2108R1, dated 4/26/2012
Utility
10. PURCHASE EXECUTION:
A. State Departments
1) Purchase Documents:
State departments must use the Purchasing Authority Purchase Order (Std. 65) for purchase
execution. An electronic version of the Std. 65 is available at the Office of State Publishing web
site: http://www.dgs.ca.gov/pd/Forms.aspx (select Standard Forms).
Ali Purchasing Authority Purchase Orders (Std. 65) shall contain the following:
• Agency Order Number (Purchase Order Number)
• Ordering Agency Name
• Agency Billing Code
• Purchasing Authority Number
• Leveraged Procurement Number (Contract Number)
• Supplier information (Contact Name, Address, Phone Number, Fax Number, E-mail)
• Line Item number
• Quantity
• Unit of Measure
• Commodity Code Number
• Product Description
• Unit Price
• Extension Price
2) Blanket Orders:
The use of blanket orders against this mandatory statewide contract is not allowed.
3) American Recovery and Reinvestment Act (ARRA) - Supplemental Terms and Conditions:
Ordering departments executing purchases using ARRA funding must attach the ARRA
Supplemental Terms and Conditions document to their individual purchase documents.
Departments are reminded that these terms and conditions supplement, but do not replace,
standard State terms and conditions associated with this leveraged procurement agreement.
• ARRA Supplemental Terms and Conditions
Contract 1-12-23-14
User Instructions
Page 5 5/25/2012
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatary) No: 1-12-14
Contract User Instructions
Note: Additional information regarding ARRA is available by clicking here to access the email
broadcast dated 08/10/09, titled Supplemental Terms and Conditions for Contracts Funded
by the American Recovery and Reinvestment Act.
B. Local Govemmental Mencies
Local governmental agencies may use their own purchase document for purchase execution. The
purchase documents must include the same data elements as listed above (Exception: Purchasing
Authority Number is used by State departments only). The Contractor shall not accept purchase
documents from local agencies that do not have a DGS issued billing code as described in Article 2B.
C. Documentation
All ordering agencies will submit a copy of executed purchase documents to:
DGS - Procurement Division (IMS# Z-1)
Attn: Data Entry Unit
707 Third Street, 2nd Floor, MS 2-212
West Sacramento, CA 95605-2811
11. ORDERING PROCEDURE:
A. Ordering Methods:
Ordering agencies are to submit appropriate purchase documents directly to the Contractor via one of
the following ordering methods:
• U.S. Mail
• Facsimile
• E-mail
The Contractor's Order Placement Information is as follows:
. QRDER; PI icEtt Nt R !I # -) t;Al:. ;
U.S. Mail
Facsimile
Email
Folsom Lake Ford
Attn: Dan Raimondi or
(916) 353-2078
danr@folsomlakeford.com
Mark Paoli
12755 Folsom Blvd.
Folsom, CA 95630
Note: When using any of the ordering methods specified above, all State departments must conform to
proper State procedures.
12. MINIMUM ORDER:
The minimum order shall be one (1) vehicle.
13. ORDER RECEIPT CONFIRMATION:
The Contractor will provide ordering agencies with an order receipt confirmation, via e-mail or facsimile,
within 48 hours of receipt of purchase document. The Order Receipt Confirmation shall include the following
information:
Contract 1-12-23-14 Page 6 5/25/2012
User Instructions
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
contract (Mandatory) No; 1 12' -14.
Contract User Instructions
• Ordering Agency Name
• Agency Order Number (Purchase Order Number)
• Purchase Order Total Cost
• Anticipated Delivery Date
14. CALIFORNIA HIGHWAY PATROL (CHP) PERFORMANCE AND RADIO TESTING:
The CHP shall conduct performance and radio testing on the enforcement vehicles for their business
purposes. Upon successful testing a copy of the CHP's acceptance letter shall be posted and incorporated
into these user instructions for ordering agencies' information.
15. PRE -DELIVERY CHECKLIST:
Prior to delivery, each vehicle shall be completely inspected, serviced and detailed by the delivering dealer
and/or the manufacturer's pre -delivery service center. A copy of the pre -delivery checklist shall be
completed for each vehicle, signed by a representative of the organization performing the inspection/service,
and delivered with the vehicle.
16. DELIVERY:
Delivery made to any State department is to begin within 90 days after receipt of order (ARO). State
departments may limit delivery to a maximum of ten (10) units per working day. Contractor is requested to
make deliveries in Los Angeles County, Orange County, San Bernardino Metropolitan Area, and San
Diego Metropolitan Area during off-peak hours. Off-peak hours are Monday through Friday, 10:00 AM to
4:00 PM.
Delivery to local governmental agencies is to be completed in full within 150 days ARO.
17. DOCUMENTS:
The following documents shall be delivered to the receiving agency with the vehicle:
1. Completed and signed pre -delivery checklist with the VIN # and purchase order number
2. "Line Set Tickets" or "Window Sticker showing all options installed and/or deleted
3. One (1) copy of the new vehicle warranty
4. One (1) Ford owner's manual
18. EMERGENCY/EXPEDITED ORDERS:
Not applicable under this contract.
19. FREE ON BOARD (FOB):
The Contractor will be required to deliver vehicles to State agencies or local agencies FOB Destination,
Sacramento County. Additionally, delivery shall be FOB Destination to the California Highway Patrol (CHP),
Fleet Operations, 3300 Reed Ave., West Sacramento, California 95605.
Vehicles shall be delivered from the factory to the dealer's place of business. If the purchase order indicates
delivery outside an FOB point, the dealer and agency will negotiate for delivery beyond the FOB point. This
delivery may be subject to an additional delivery charge by the Contractor. This charge shall be shown as a
separate item on the purchase order and invoice.
State agencies requesting delivery outside the FOB area must contact the Office of Transportation
Management for freight rate comparisons if the dealer is delivering the vehicle.
Contract 1-12-23-14 Page 7 5/25/2012
User Instructions
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatory) No; 1-12-14
Contract User Instructions
These delivery instructions will be provided on the purchase order. The Contractor receiving a purchase
order without specific transportation instructions must contact the ordering agency.
The Contractor shall insure that each vehicle reaches its delivery point with no less than five (5) gallons of
fue! in the fuel tank.
Drop ship deliveries shall not be made without prior State inspection.
Vehicles delivered from a dealer with more than 50 miles on the odometer will be charged 50 cents for each
mile exceeding 50 miles. This charge shall be deducted from the order price for each vehicle delivered
against each order. Vehicles delivered with more than 500 miles on the odometer will not be accepted.
20. SHIPPED ORDERS:
All shipments must comply with General Provisions (rev 06/08/2010), Paragraph 12 entitled "Packing and
Shipment". The General Provisions are available at:
http://www.documents.dqs.ca.gov/pd/modellano/GPnonIT060810.pdf.
21. INVOICING:
Ordering agencies may require separate invoicing, as specified by each ordering organization. Invoices will
contain the following information:
• Contractor's name, address and telephone number
• Leveraged Procurement Number (Contract Number)
• Agency Order Number (Purchase Order Number)
• Item and commodity code number
• United Nations Standard Products and Services Code (UNSPSC)
• Quantity purchased
• Contract price and extension
• State sales and/or use tax
• Prompt payment discounts/cash discounts, if applicable
• Totals for each order
22. WARRANTY:
The manufacturer's regular new vehicle warranty shall apply to all vehicles procured against this contract.
The warranty shall be factory authorized and shall cover not Tess than three (3) years/36,000 miles, bumper
to bumper, no charge parts and labor. Additionally, an extended powertrain care Ford warranty is available
at no charge under this contract and shall be included with all vehicle purchases. This includes a five (5)
year/100,000 mile powertrain, zero ($0.00) deductible warranty.
23. WARRANTY REPAIR PARTS:
It shall be the responsibility of the Contractor to maintain an adequate stock of all regular and special parts to
meet the continuing service and warranty repair parts needs without undue delay. Warranty replacement
parts shall be available within three (3) working days after telephone notification.
Contract 1-12-23-14 Page 8 5/25/2012
User Instructions
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatory) No: 1*1 -23-14
Contract User Instructions
24. PAYMENT:
Terms
Payment terms for this contract are net forty-five (45) days. Payment will be made in accordance with
the provisions of the California Prompt Payment Act, Government Code Section 927, et seq. Unless
expressly exempted by statute, the Act requires State departments to pay properly submitted,
undisputed invoices not more than forty- five (45) days after the date of acceptance of goods,
performance of services, or receipt of an undisputed invoice, whichever is later.
Cash Discount
Payment terms for this contract include a $500.00 per vehicle discount for payment made within twenty
(20) days. For this contract, cash discount time will be defined by the State as beginning only after the
vehicle has been inspected, delivered and accepted by the receiving agency or from the date a correct
invoice is received in the office specified on the purchase document, whichever is later. Payment is
deemed to be made for the purpose of earning the discount, on the date on the State warrant or check.
Normally, acceptance will be accomplished within twenty (20) normal business hours after a vehicle is
delivered. Payment will be made in accordance with the provisions of the California Prompt Payment
Act. For payment on or after the 21st calendar day after the vehicle has been accepted, the $600.00
discount does not apply.
CAL -Card Use
Use of the CAL -Card for payment of invoices or purchase orders is not allowed under this statewide
contract.
Payee Data Record
Each State accounting office shall have a copy of the Payee Data Record (Std. 204) in order to process
payments. State departments should forward a copy of the Std. 204 to their accounting office(s).
Without the Std. 204, payment may be unnecessarily delayed. State departments and local
governmental agencies should contact the Contractor for a copy of the Payee Data Record.
25. CALIFORNIA SELLER'S PERMIT:
The California seller permit number for the contractor is listed below. State departments can verify that
permits are currently valid at the following website: www.boe.ca.gov. State departments must adhere to the
file documentation required identified in the State Contracting Manual Volume 2 and Volume 3, as
applicable.
.Contractor Name
Seller Psrnaj:# . • ;
Folsom Lake Ford
26797640
Contract 1-12-23-14 Page 9
User Instructions 5/25/2012
STATE OF CALIFORNIA
DEPARTMENT OF GENERAL SERVICES
PROCUREMENT DIVISION
Contract (Mandatory) f No:1-1 3-14
Contract User instructions
26. RECYCLED CONTENT:
State departments are required to report purchases in many product categories. The Post -Consumer
Recycled Content Percentages Worksheet for the Contractor is identified as Attachment C.
27. SMALL BUSINESS/DISABLED VETERAN BUSINESS ENTERPRISE PARTICIPATION:
There is no small business (SB) or disabled veteran business enterprise (DVBE) participation for this
contract.
28. ATTACHMENTS:
Attachment A — Contract Pricing
Attachment B1 — State of California Bid Specification Number 2310-1951, dated 3/14/2012 SEDAN
Attachment B2 — State of California Bid Specification Number 2310-2108R1, dated 4/26/2012 UTILITY
Attachment C — Post -Consumer Recycled Content Percentages Worksheet
Attachment D — Folsom Lake Ford Dealer Catalog, dated 01/16/2012
Contract 1-12-23-14 Page 10 5/25/2012
User instructions
CONTRACT 1-12-23-14 USER INSTRUCTIONS
Enforcement Vehicles
Contractor: FOLSOM LAKE FORD
Vehicle:
CONTRACT PRICING
ENFORCEMENT SEDAN, POLICE INTERCEPTOR
TERMS: $500.00 discount per vehicle for payment within 20 days
101
EACH
103 PAIR
1
1
1
1
FORD ENFORCEMENT SEDAN POLICE INTERCEPTOR
Law Enforcement High Speed Police Interceptor in
accordance with specification 2310-1951 dated
3/14/2012
Extended Powertrain Warranty
Ballistic Door Panel Option - Supply and Install front
driver and passenger door mounted ballistic panels
rated National Institute of Justice (NIJ) Type III
DELETE Ballistic Door Panel Option - Supply and
install front driver and passenger door mounted
ballistic panels rated National Institute of Justice
(NIJ) Type I11- Less 5%
FORD
FORD
BLS MFG.
BLS MFG.
2510702 P2M
2510702
2510702
65C
FOLSOM LAKE FORD DEALER CATALOG
A Attachment D, Dealer Catalog - Sedan Police Interceptor Price List
1/16/2012
E
ATTACHMENT A
Contract Pricing
P2M
PAIR
$23,242.00
($2,670.00)
Page 1 of 1
D3S
C E.7;Fh:AL F:Rb1.i k5
STATE OF CALIFORNIA
BID SPECIFICATION
SEDAN, LAW ENFORCEMENT
HIGH SPEED POLICE PURSUIT
ATTACHMENT B
2310-1951
1.0 SCOPE:
This specification describes the State of California minimum requirements for an all or rear
wheel drive automobile to be used in high-speed highway traffic and general law enforcement
work. The vehicle will at times be operated at speeds in excess of 100 miles per hour for both
short and long durations. It will be driven on all types of roads, and road surfaces and at altitudes
ranging from approximately 200 feet below sea level to 10,000 feet above sea level. Ambient
temperatures to which the vehicle will be exposed will range from approximately 0°F to 120°F.
The manufacturer shall use components, materials and design practices that are the best
available in the industry for the type of operational conditions to which the vehicles will be
subjected. Engine, transmission, driveline, differential, brake, suspension, wheel, tire and other
component parts of the vehicle shall be selected to give maximum performance, service life, as
well as safety and not merely meet the minimum requirements of this specification. Where
necessary, the component parts shall exceed the usual quantity, quality, or capacity generally
supplied with standard production vehicles in order to withstand the unusual strain, exposure,
temperature, wear and use required for a police application.
2.0 RULES AND REGULATIONS:
Vehicles shall comply with all applicable California Vehicle Code (CVC), Code of Federal
Regulations, Title 49, "Federal Motor Vehicle Safety Standard" (FMVSS) and California Code of
Regulations, Title 13, "Motor Vehicles" rules and regulations (except emissions regulations).
Vehicles shall also comply with Society of Automotive Engineers (SAE) J 1100, "Motor Vehicle
Dimensions" in addition to all other applicable SAE standards. In addition, all vehicles shall
comply with all other Federal and State rules, regulations and safety standards applicable to the
vehicle type in effect on the date of the opening of the invitation for bid. Vehicles shall meet 50
State emissions requirements that allow the resale of these vehicles to the general public as
originally equipped upon emergency vehicle "service life" completion.
3.0 VEHICLE CERTIFICATION:
All vehicles shall be certified by the manufacturer as "Police Pursuit' sedan and shall be
suitable for high-speed pursuit or emergency driving. All vehicles shall meet the following
minimum specifications:
4.0 REQUIREMENTS:
4.1 General: Each vehicle shall be new (unused), current model year production. Each vehicle shall
be supplied with all equipment and accessories indicated es standard equipment in the
manufacturer's published literature unless specifically deleted as stated in this specification.
Optional equipment necessary to meet the requirements of this specification shall also be
installed.
4.2 Engine: The engine shall be a manufacturer's "Police Package" configuration equipped with
altitude compensating electronic fuel injection.
The engine shall have a displacement, to be determined by the manufacturer, sufficient so that all
performance requirements described in Section 1.0, Scope and Section 4.26, Performance
Requirements are achieved.
The engine shall be designed to operate knock free at all engine and vehicle speeds on unleaded
fuel with a minimum octane rating of 87 (RM + MM - 2).
4.3 Engine Oil Cooler: An auxiliary engine oil cooler shall be installed if required to maintain oil
operating temperatures 5 300°F, under operating conditions described in the Section 1 of this
specification.
RMADUELL PAGE 1 OF 6 3/14/2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
2310-1951
4.4 Fuel Suppiv System: The fuel supply system shall be of such a design to eliminate vapor lock
when the engine is operating in high ambient temperatures or during periods of extended idling.
4.5 Fuel Tank: The fuel tank furnished shall be the largest capacity available.
4.6 Cooling System: The cooling system shall be liquid pressurized, forced circulation type. The
manufacturer shall provide the heaviest duty cooling system components and recovery system
applicable to the model offered. The cooling system design and capacity shall maintain the
engine at optimum temperature, under ail operating conditions specified, without any loss of
coolant or overheating of engine and components. The cooling system shall be free of
contaminants that may affect cooling system component longevity and performance. Optimum
engine temperature shall be maintained with the vehicle loaded to the vehicle manufacturer's
published maximum gross vehicle weight rating (GVWR) and continually operated in ail operating
environments described within the scope of this specification.
4.7 Electrical System: The electrical system shall be 12 volt negative ground. All wiring shall
include weather proof connectors.
The vehicle battery shall be the optional heaviest duty type available, compatible with the vehicle
charging system and intended for police service. The vehicle battery shall have a minimum of
700 cold cranking amps, with a manufacturing date not exceeding six (6) months prior to vehicle
delivery. Vehicles will not be accepted with batteries exhibiting less than 90 percent of full charge
at time of delivery.
The generator/alternator shall be the highest capacity optional generator/alternator listed in the
manufacturer's current police package brochure applicable to the vehicle bid. It shall have a
minimum 160 amp output.
4.8 Transmission: The transmission shall be fully automatic transmission equipped with auxiliary
transmission fluid coolers, if necessary, to maintain oil operating temperatures not to exceed
275°F, maximum. Console or floor mounted shifters are acceptable, but must be capable of
allowing the installation of CHP radio and equipment.
4.9 Steering: The power steering system shall be equipped with a fluid cooler, if necessary, to
maintain power steering fluid operating temperatures not to exceed 300°F, maximum.
4.10 Brakes: The brakes shall be power assisted and feature an anti -lock brake system (ABS). All
four wheels shall be equipped with disc brakes. Friction material shall be designed for police
applications.
4.11 Wheels and Tires: Each vehicle shall be supplied with five (5) matching wheels and tires. One
(1) of the five (5) shall be a matching full size wheel and spare tire. A space saver type spare tire
is not acceptable. The wheels shall have a safety ridge rolled into the rim or otherwise designed
to prevent the tire from separating from the wheel in the event of a flat. Wheels shall be steel
construction, designed for police applications. Lug nuts shall be covered with a center cap.
Manufacturer's standard Tire Pressure Monitoring System shall be suppiied. If a tire pressure
activation tool is needed to reset the light on the tire pressure monitoring system, one tool shall
be provided for each vehicle as part of this requirement.
The vehicle manufacturer shall test and certify tires as acceptable for original equipment and
replacement installation on the police package vehicle specified in this invitation for bid.
Any wheel weights used shall be "non -lead" type.
4.12 Suspension: The front and rear suspension including shock absorbers shall be designed for
police work. Front and rear stabilizer bars are required.
RMADUELL PAGE 2 OF 6
3/14/2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
2310-1951
4.13 Differential: The differential shall be the conventional type, ring and pinion gears, with a ratio
designed to give the best overall performance for the transmission and tire size installed on
vehicle. The gear ratio shall be the same on all vehicles.
4.14 Radio Suppression: The system shall not cause or be affected by any electrical magnetic
interference (EMI) or radio frequency interference (RFI) including but not limited to the following
radio frequencies currently in use by CHP vehicles:
• Low Band: 39 - 46 MHz Transmit and Receive
• Repeaters: 153 -155 MHz Transmit and Receive
• Radio, UHF 440 - 490 MHz Transmit and Receive
• Allied Radio 806 - 870 MHz Transmit and Receive
• Allied Radio 581 - 866 MHz Transmit and Receive
• Allied Radio 159 - 173 MHz Transmit and Receive
• Allied Raclin 150 - 174 MHz Transmit and Receive
• Radio / Repeater 764 - 806 MHz Transmit and Receive
• Canines 26 - 28 MHz Receive
• Canines 303.9 MHz Receive
• Computers: 896-901 MHz Transmit, 935-940 MHz Receive
• Canines: 303.875 MHz Receive
The system shall not cause more than one (1) dB of radio degradation at the
antenna whether it be radiated or conducted radio frequency interference (RFI), or
electromagnetic interference (EMI). If the system causes any two or all three types of
interference, the total combined allowable receiver degradation is 1 dB at all CHP frequencies.
See Exhibit 2 for radio degradation testing details.
4.15 Body: The body shall be a four door sedan with center post. Protective side molding shall not be
installed on the vehicle. This is to permit installation of an Agency insignia (33" long by 20" high)
without trim interference.
Rear deck lid emblems and trim, if applicable, shall be removed to permit the installation of
Agency decals if requested by the agency at the time of the purchase order. All emblems and
trim removed shall be furnished to the Agency in bulk pack.
The wheel wells shall be constructed so that OEM approved tire chains or cables may be
installed in a conventional manner, without clearance problems and without causing body or
structural damage to the vehicle.
4.16 Exterior Color: The body shall be painted manufacturer's gloss black. The roof panel and lower
portion of both front doors below the window belt line shall be painted manufacturer's gloss bright
white. After -factory applied paint to accomplish the white portion of the two-tone paint scheme is
acceptable if factory applied black and white two-tone paint configuration is unavailable from the
manufacturer.
4.17 Interior/Seat Upholstery: Front seats shall be bucket type accommodating a center console.
The driver's seat shall be power adjustable and shall be designed for maximum comfort, support
and durability. The front and rear seat shall be the manufacturer's standard cloth
upholstery.
4.18 Speedometer The vehicle described in this specification will be used in law enforcement and
speedometer accuracy is essential. The speedometer shall be calibrated and be accurate within
two (2) miles per hour at speeds from 15 to 100 miles per hour of the true vehicle speed, within
the environmental operating conditions specified in Section 1.0 Scope. The dial face shall be
marked up to a minimum of 140 miles per hour. The design of the speedometer shall be such to
insure accuracy throughout the life of the vehicle. The face markings shall be in increments no
greater than two (2) miles per hour. The face shall contain the wording "Certified Speedometer,"
RMADUELL PAGE 3 OF 6 3/14/2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
2310-1951
or other wording to indicate that speedometer accuracy is certified, or a letter of certification of
accuracy shall be provided with each unit. The bidder shall specify the size, brand and model of
tires for which the speedometer is certified. The speed indicator pointer shall not cover more than
a two mile per hour section of the scale.
4.19 Radio: The vehicle shall be supplied with the factory radio.
4.20 Radio Speaker: Vehicle shall be factory equipped with at least two (2) front mounted radio
speakers mounted and two (2) rear mounted radio speakers.
4.21 Spotlights: The vehicle shall be supplied with a factory installed spotlight accommodation
package for each side of the vehicle including predrilled "A" pillar posts and any required
door/door weather-strip modifications.
4.22 Hood -Latch Release: The hood latch release shall be mounted inside the front passenger
compartment so that the hood can not be readily opened from outside the vehicle. The release
shall be readily accessible to the seated driver.
4.23 Floor Covering: The floor covering of the front and rear floor may be standard rubber or carpet.
The color shall be keyed to the upholstery color. OEM floor mats shall be included for carpeted
vehicles.
4.24 Rear Deck Lid Release: The rear deck lid release shall be mounted in a location readily
accessible to the driver. Dealer modification to meet the requirement for a rear deck lid release in
a location readily accessible to the driver is acceptable however no holes may be left as a result
of the modification.
4.25 Miscellaneous Equipment: The vehicle shall be equipped with the following miscellaneous
equipment:
• Tilt steering wheel
• Fresh air type heater and defroster. Refrigeration air conditioning of a size and type
recommended and installed by the manufacturer of the vehicle. Vehicle air conditioning
system shall include any components required to protect the compressor from excessively
high head pressure.
• Intermittent windshield wiper system.
• Fuel level and water temperature indicator gauges.
• 12-volt DC power outlet in front compartment.
• Ballistic Door Panels (front driver and passenger doors), threat level 3 or better.
• Cruise control
• Dual electric homs or dual note horn.
• Halogen headlamps, high and low beam.
• Map/dome/courtesy light(s) which provide the following functions:
o When vehicle front doors are opened, none of the interior map/dome/courtesy light(s) shall
illuminate automatically.
o At least one map/dome/courtesy light shall be manually operated by the driver to illuminate
the lap of the seated driver.
• Quick release style driver's side inside door handle to allow the driver's door to be unlocked
by pulling on the inside handle.
• Driver and front passenger front impact air bag.
• Driver and front passenger side impact air bag.
• All four (4) doors shall contain power locking and unlocking mechanisms controlled by
switches located on the driver's side door control panel.
• All four windows shall be power actuated and controlled from the driver's side door control
panel with a lockout feature to prevent other windows from being operated when locked out
by the driver.
• Rear window defogger/defroster on a separate switch.
RMADUELL PAGE 4 OF B
3/14/2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
2310-1951
• The vehicle shall use the same single key for ignition, door, trunk and glove box (if vehicle
includes). A set of four (4) total keys shall be supplied for each vehicle. Each vehicle shall
be keyed individually.
• Arm rests on each of the four (4) doors (arm rests in rear passenger compartment may be
mounted on other than the door if vehicle is so designed).
• Left and right remote control outside mirrors. Similar in appearance and mounted on left and
right front doors. Both mirrors shall be controllable from the driver's seat.
• Windshield and all windows shall feature tinted glass.
• Light in trunk with trunk lid actuated switch.
• Standard tool kit including wheel changing tools and jack adequate to safely lift the vehicle.
4.26 Performance Requirements: See Exhibit 1 for testing methodology.
4.26.1 All vehicles shall have a top speed of not less than 120 MPH.
4.26.2 AD vehicles delivered against this specification shall be capable of sustained high-speed
operation at wide open throttle for a minimum of 25 miles without damage to the power
train.
4.26.3 All vehicles shall meet the following acceleration requirements.
The following acceleration tests are to be performed on level ground at nominal sea level
elevation:
• 0 to 60 miles per hour in 10.0 seconds or less.
• 0 to 100 miles per hour in 29.0 seconds or less.
• 50 to 100 miles per hour in 22.0 seconds or less.
• Attain a speed of 120 miles per hour within a distance of two (2) miles.
The following acceleration test will be performed on level ground at approximately 6,000
feet of elevation:
• 0 to 60 miles per hour in 13.0 seconds or less.
4.26.4 All vehicles shall meet the following braking requirements.
Test Methodology:
• All tests will be performed on a level, dry, paved surface.
• Four (4) maximum braking effort stops, with anti -lock brake system (ABS) activated
(operating), will be made from a speed of 90 miles per hour.
• The stops shall be at two (2) minute intervals. Between stops, the vehicle will be
driven in order to aid cooling of the brakes.
• Stopping distance and the ability to stop in a straight line (i.e. without noticeable
brake pull to the right or left) and within its own lane will be evaluated.
• With the vehicle stopped for approximately five (5) minutes after the above test, the
test will be repeated.
• Stopping distance and the ability to stop in a straight line (i.e. without noticeable
brake pull to the right or left) and within its own lane will again be evaluated.
• Any vehicle that fails to remain within its own lane during the course of this test shall
not be acceptable.
• The stopping distance of each of the eight (8) stops will be combined to calculate the
average stopping distance of the vehicle.
• The average maximum acceptable stopping distance from 90 — 0 miles per hour shall
be no more than 350 feet.
RMADUELL PAGE 5 of 6 3/14/2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
2310-1951
Fade Resistance:
The vehicle shall be subjected to a simulated pursuit course approximately four (4) miles
in length and approximately seven (7) minutes in duration.
• The course is comprised of a highway and city pursuit scenario.
• The vehicle will be subjected to three (3) 70 mile per hour full ABS stops followed by
not more than twenty (20) "slow and clear the intersection" brake applications while
traversing the simulated city street. The "slow and clear the intersection" brake
applications will be at speeds of less than 10 miles per hour.
• There will be no cool -down period between brake applications.
• Any vehicle that exhibits brake fade during the course of this test shall not be
acceptable.
The State reserves the right to test the performance of any 2012 and later model year
vehicle offered to confirm the vehicles ability to meet the acceleration, top speed and
braking performance requirements as described herein.
RIUTADUELL PAGE B OF 6
3/14l2012
1-12-23-14 SEDAN, LAW ENFORCEMENT
DES
STATE OF CALIFORNIA ATTACHMENT B
BID SPECIFICATION 2310.2108-R1
UTILITY VEHICLE, LAW ENFORCEMENT
HIGH SPEED POLICE PURSUIT
1.0 SCOPE:
This specification describes the State of California minimum requirements for an all or rear
wheel drive utility vehicle to be used in high-speed highway traffic and general law enforcement
work. The vehicle will at times be operated at speeds in excess of 100 miles per hour for both
short and long durations. It will be driven on all types of roads, and road surfaces and at altitudes
ranging from approximately 200 feet below sea level to 10,000 feet above sea level. Ambient
temperatures to which the vehicle will be exposed will range from approximately 0°F to 120°F.
The manufacturer shall use components, materials and design practices that are the best
available in the industry for the type of operational conditions to which the vehicles will be
subjected. Engine, transmission, driveline, differential, brake, suspension, wheel, tire and other
component parts of the vehicle shall be selected to give maximum performance, service life, as
well as safety and not merely meet the minimum requirements of this specification. Where
necessary, the component parts shall exceed the usual quantity, quality, or capacity generally
supplied with standard production vehicles in order to withstand the unusual strain, exposure,
temperature, wear and use required for a police application.
2.0 RULES AND REGULATIONS:
Vehicles shall comply with all applicable California Vehicle Code (CVC), Code of Federal
Regulations, Title 49, "Federal Motor Vehicle Safety Standard" (FMVSS) and California Code of
Regulations, Title 13, "Motor Vehicles" rules and regulations (except emissions regulations).
Vehicles shall also comply with Society of Automotive Engineers (SAE) J 1100, "Motor Vehicle
Dimensions" in addition to all other applicable SAE standards. In addition, all vehicles shall
comply with all other Federal and State rules, regulations and safety standards applicable to the
vehicle type in effect on the date of the opening of the invitation for bid. Vehicles shall meet 50
State emissions requirements that allow the resale of these vehicles to the general public as
originally equipped upon emergency vehicle "service life" completion.
3.0 VEHICLE CERTIFICATION:
All vehicles shall be certified by the manufacturer as a "Police Pursuit Utility Vehicle" and shall
be suitable for high-speed pursuit or emergency driving. All vehicles shall meet the following
minimum specifications:
4.0 REQUIREMENTS:
4.1 General: Each vehicle shall be new (unused), current model year production. Each vehicle shall
be supplied with all equipment and accessories indicated as standard equipment in the
manufacturer's published literature unless specifically deleted as stated in this specification.
Optional equipment necessary to meet the requirements of this specification shall also be
installed.
4.2 Engine: The engine shall be a manufacturer's "Police Package" configuration equipped with
altitude compensating electronic fuel injection.
The engine shall have a displacement, to be determined by the manufacturer, sufficient so that all
performance requirements described in Section 1.0, Scope and Section 4.26, Performance
Requirements are achieved.
The engine shall be designed to operate knock free at all engine and vehicle speeds on unleaded
fuel with a minimum octane rating of 87 (RM + MM - 2).
4.3 Engine Oil Cooler: An auxiliary engine oil cooler shall be installed if required to maintain oil
operating temperatures _5 300°F, under operating conditions described in the Section 1 of this
specification.
RMADUELL PAGE 1 OF 6 4/26/2012
1-12-23-14 UTILITY VEHICLE. LAW ENFORCEMENT
2310-2108-R1
4.4 Fuel Supply System: The fuel supply system shall be of such a design to eliminate vapor lock
when the engine is operating in high ambient temperatures or during periods of extended idling.
4.5 Fuel Tank: The fuel tank furnished shall be the largest capacity available.
4.6 Cooling System: The cooling system shall be liquid pressurized, forced circulation type. The
manufacturer shall provide the heaviest duty cooling system components and recovery system
applicable to the model offered. The cooling system design and capacity shall maintain the
engine at optimum temperature, under all operating conditions specified, without any loss of
coolant or overheating of engine and components. The cooling system shall be free of
contaminants that may affect cooling system component longevity and performance. Optimum
engine temperature shall be maintained with the vehicle loaded to the vehicle manufacturer's
published maximum gross vehicle weight rating (GVWR) and continually operated in all operating
environments described within the scope of this specification.
4.7 Electrical System: The electrical system shall be 12 volt negative ground. All wiring shall
include weather proof connectors.
The vehicle battery shall be the optional heaviest duty type available, compatible with the vehicle
charging system and intended for police service. The vehicle battery shall have a minimum of
660 cold cranking amps, with a manufacturing date not exceeding six (6) months prior to vehicle
delivery. Vehicles will not be accepted with batteries exhibiting less than 90 percent of full charge
at time of delivery.
The generator/alternator shall be the highest capacity optional generator/alternator listed in the
manufacturer's current police package brochure applicable to the vehicle bid. It shall have a
minimum 160 amp output.
4.8 Transmission: The transmission shall be fully automatic transmission equipped with auxiliary
transmission fluid coolers, if necessary, to maintain oil operating temperatures not to exceed
275°F, maximum. Console or floor mounted shifters are acceptable, but must be capable of
allowing the installation of CHP radio and equipment.
4.9 Steering: The power steering system shall be equipped with a fluid cooler, if necessary, to
maintain power steering fluid operating temperatures not to exceed 300°F, maximum.
4.10 Brakes: The brakes shall be power assisted and feature an anti -lock brake system (ABS). Ail
four wheels shall be equipped with disc brakes. Friction material shall be designed for police
applications.
4.11 Wheels and Tires: Each vehicle shall be supplied with five (5) matching wheels and tires. One
(1) of the five (5) shall be a matching full size wheel and spare tire. A space saver type spare tire
is not acceptable. The wheels shall have a safety ridge rolled into the rim or otherwise designed
to prevent the tire from separating from the wheel in the event of a flat. Wheels shall be steel
construction, designed for police applications. Lug nuts shall be covered with a center cap.
Manufacturer's standard Tire Pressure Monitoring System shall be supplied. If a tire pressure
activation tool is needed to reset the light on the tire pressure monitoring system, one tool shall
be provided for each vehicle as part of this requirement.
The vehicle manufacturer shall test and certify tires as acceptable for original equipment and
replacement installation on the police package vehicle specified in this invitation for bid.
Any wheel weights used shall be "non -lead° type.
4.12 Suspension: The front and rear suspension including shock absorbers shall be designed for
police work. Front and rear stabilizer bars are required.
RMADUELL
1-12-23-14
PAGE 2 OF 6
4/26/2012
UTILITY VEHICLE, LAW ENFORCEMENT
2310.2108-R1
4.13 Differential: The differential shall be the conventional type, ring and pinion gears, with a ratio
designed to give the best overall performance for the transmission and tire size installed on
vehicle. The gear ratio shall be the same on all vehicles.
4.14 Radio Suppression: The system shall not cause or be affected by any electrical magnetic
interference (EMI) or radio frequency interference (RFI) including but not limited to the following
radio frequencies currently in use by CHP vehicles:
Low Band: 39 - 46 MHz Transmit and Receive
Repeaters: 153 -155 MHz Transmit and Receive
Radio, UHF 440 - 490 MHz Transmit and Receive
Allied Radio 806 - 870 MHz Transmit and Receive
Allied Radio 581 - 866 MHz Transmit and Receive
Allied Radio 159 - 173 MHz Transmit and Receive
Allied Radio 150 - 174 MHz Transmit and Receive
Radio / Repeater 764 - 806 MHz Transmit and Receive
Canines 26 - 28 MHz Receive
Canines 303.9 MHz Receive
Computers: 896-901 MHz Transmit, 935-940 MHz Receive
Canines: 303.875 MHz Receive
The system shall not cause more than one (1) dB of radio degradation at the
antenna whether it be radiated or conducted radio frequency interference (RFI), or
electromagnetic interference (EMI). If the system causes any two or all three types of
interference, the total combined allowable receiver degradation is 1 dB at all CHP frequencies.
See Exhibit 2 for radio degradation testing details.
4.15 Body: The body shall be a four door, sport utility with center post. Protective body side molding
shall not be installed on the vehicle. This is to permit installation of an Agency insignia (33" long
by 20" high) without trim interference.
The wheel wells shall be constructed so that OEM approved tire chains or cables may be
installed in a conventional manner, without clearance problems and without causing body or
structural damage to the vehicle.
4.16 Exterior Color: The body shall be painted manufacturer's gloss black. The roof panel and lower
portion of both front doors below the window belt line shall be painted manufacturer's gloss bright
white. After -factory applied paint to accomplish the white portion of the two-tone paint scheme is
acceptable if factory applied black and white two-tone paint configuration is unavailable from the
manufacturer.
4.17 Interior/Seat Upholstery: Front seats shall be bucket type accommodating the installation of a
center console by the end user. A 60/40 split bench / bucket type seat is not acceptable. The
driver's seat shall be power adjustable and shall be designed for maximum comfort, support and
durability. The front and rear seat shall be the manufacturer's standard cloth upholstery.
4.18 Speedometer: The vehicle described in this specification will be used in law enforcement and
speedometer accuracy is essential. The speedometer shall be calibrated and be accurate within
two (2) miles per hour at speeds from 15 to 100 miles per hour of the true vehicle speed, within
the environmental operating conditions specified in Section 1.0 Scope. The dial face shall be
marked up to a minimum of 140 miles per hour. The design of the speedometer shall be such to
insure accuracy throughout the life of the vehicle. The face markings shall be in increments no
greater than two (2) miles per hour. The face shall contain the wording "Certified Speedometer,"
or other wording to indicate that speedometer accuracy is certified, or a letter of certification of
accuracy shall be provided with each unit. The bidder shall specify the size, brand and model of
tires for which the speedometer is certified. The speed indicator pointer shall not cover more than
a two mile per hour section of the scale.
RMADUELL PAGE 3 OF 6 4/26/2012
1-12-23-14 UTILITY VEHICLE. LAW FNFORCEMENT
2310-2108-R1
4.19 Payload: The vehicle shall have a minimum payload of 1500 lbs when configured in the
standard Police Pursuit rated version.
4.20 Radio: Vehicle shall be factory equipped with the factory radio and at least two (2) front mounted
radio speakers and two (2) rear mounted radio speakers.
4.21 Spotlights: The vehicle shall be supplied with a factory installed spotlight accommodation
package for each side of the vehicle including predrilled "A" pillar posts and any required
door/door weather-strip modifications.
4.22 Hood -Latch Release: The hood latch release shall be mounted inside the front passenger
compartment so that the hood can not be readily opened from outside the vehicle. The release
shall be readily accessible to the seated driver.
4.23 Floor Covering: The floor covering of the front and rear floor may be standard rubber, vinyl or
carpet. The color shall be keyed to the upholstery color. OEM floor mats shall be included for
carpeted vehicles.
4,24 Interior Area: The Vehicle shall be equipped with 1st and 2nd row seats only, and shall have a
seating capacity of minimum 5.
4.25 Miscellaneous Equipment: The vehicle shall be equipped with the following miscellaneous
equipment:
• Tilt steering wheel
• Fresh air type heater and defroster. Refrigeration air conditioning of a size and type
recommended and installed by the manufacturer of the vehicle. Vehicle air conditioning
system shall include any components required to protect the compressor from excessively
high head pressure.
• Intermittent windshield wiper system.
• Fuel level and water temperature indicator gauges.
• 12-volt DC power outlet in front compartment.
• Ballistic Door Panels (front driver and passenger doors), threat level 3 or better.
• Cruise control
• Dual electric horns or dual note horn.
• Halogen headlamps, high and low beam.
• Map/dome/courtesy light(s) which provide the following functions:
o When vehicle front doors are opened, none of the interior mapldomelcourtesy light(s) shall
illuminate automatically.
o At least one map/dome/courtesy Tight shall be manually operated by the driver to illuminate
the lap of the seated driver.
• Quick release style driver's side inside door handle to allow the driver's door to be unlocked
by pulling on the inside handle.
• Driver and front passenger front impact air bag.
• Driver and front passenger side impact air bag.
• All four (4) doors shall contain power locking and unlocking mechanisms controlled by
switches located on the driver's side door control panel.
• All four windows shall be power actuated and controlled from the driver's side door control
panel with a lockout feature to prevent other windows from being operated when locked out
by the driver.
• Rear window defogger/defroster on a separate switch.
• The vehicle shall use the same single key for ignition, doors, rear, and glove box (if vehicle
includes). A set of four (4) total keys shall be supplied for each vehicle. Each vehicle shall
be keyed individually.
• Arm rests on each of the four (4) doors (arm rests in rear passenger compartment may be
mounted on other than the door if vehicle is so designed).
RMADUELL
1-12-23-14
PAGE 4 OF 6
4/26/2012
UTILITY VEHICLE, LAW ENFORCEMENT
2310-2108-R1
• Left and right remote control outside mirrors. Similar in appearance and mounted on left and
right front doors. Both mirrors shall be controllable from the driver's seat.
• Windshield and all windows shall feature tinted glass.
• Light in rear cargo area with rear cargo door actuated switch.
• Standard tool kit including wheel changing tools and jack adequate to safely lift the vehicle.
4.26 Performance Requirements: See Exhibit 1 for testing methodology.
4.26.1 All vehicles shall have a top speed of not less than 120 MPH.
4.26.2 All vehicles delivered against this specification shall be capable of sustained high-speed
operation at wide open throttle for a minimum of 25 miles without damage to the power
train.
4.26.3 All vehicles shall meet the following acceleration requirements.
The foliowing acceieration tests are to be performed on level ground at nominal sea level
elevation:
• 0 to 60 miles per hour in 10.0 seconds or less.
• 0 to 100 miles per hour in 29.0 seconds or less.
• 50 to 100 miles per hour in 22.0 seconds or less.
• Attain a speed of 120 miles per hour within a distance of two (2) miles.
The following acceleration test will be performed on level ground at approximately 6,000
feet of elevation:
• 0 to 60 miles per hour in 13.0 seconds or less.
4.26.4 All vehicles shall meet the following braking requirements.
Test Methodology:
• All tests will be performed on a level, dry, paved surface.
• Four (4) maximum braking effort stops, with anti -lock brake system (ABS) activated
(operating), will be made from a speed of 90 miles per hour.
• The stops shall be at two (2) minute intervals. Between stops, the vehicle will be
driven in order to aid cooling of the brakes.
• Stopping distance and the ability to stop in a straight line (i.e. without noticeable
brake pull to the right or left) and within its own lane will be evaluated.
• With the vehicle stopped for approximately five (5) minutes after the above test, the
test will be repeated.
• Stopping distance and the ability to stop in a straight line (i.e. without noticeable
brake pull to the right or left) and within its own lane will again be evaluated.
• Any vehicle that fails to remain within its own lane during the course of this test shall
not be acceptable.
• The stopping distance of each of the eight (8) stops will be combined to calculate the
average stopping distance of the vehicle.
• The average maximum acceptable stopping distance from 90 — 0 miles per hour shall
be no more than 350 feet.
RMADUELL PAGE 6 OF 6 4/26/2012
1-12-23-14 UTILITY VEHICLE, LAW ENFORCEMENT
2310-2108-R1
Fade Resistance:
The vehicle shall be subjected to a simulated pursuit course approximately four (4) miles
in length and approximately seven (7) minutes in duration.
• The course is comprised of a highway and city pursuit scenario.
+ The vehicle will be subjected to three (3) 70 mile per hour full ABS stops followed by
not more than twenty (20) "slow and clear the intersection" brake applications while
traversing simulated city street. The "slow and clear the intersection" brake
applications will be at speeds of less than 10 miles per hour.
• There will be no cool -down period between brake applications.
• Any vehicle that exhibits brake fade during the course of this test shall not be
acceptable.
The State reserves the right to test the performance of any 2012 and later model year
vehicle offered to confirm the vehicles ability to meet the acceleration, top soeed and
braking performance requirements as described herein.
RMADUELL PAGE 6 OF 6
4/26/2012
1-12-23-14 UTILITY VEHICLE, LAW ENFORCEMENT
State of California Bid 1009-014
Contract 1-12-23-14
Department of General Services ATTACHMENT
PROCUREMENT DIVISION PC RC Certification Workbook
Environmentally Preferable Purchasing Program REV 12/1712008
Letter of Certification
instruction:
All Bidders shall print and sign this letter of Certification ; certifying the minimum percentage, It not exact
percentage, listed in the spreadsheet entitled *PC RC Percentages Worksheet" is the post consumer
recycled content (PC RC) material in each product listed and offered in this contract. The certification shall
be furnished under penalty of pa:jur
Pursuant to Public Contract Code 12205(a)(1), I certify under penalty of perjury under the laws of the State
of California that the information provided in the PC RC Table worksheet in the Post Consumer Recycled
Content (PC RC) Percentages Workbook is true and correct
Solicitation No.: IFB DGS 1009-014
Company Name: FOY YV) tyir1r to v+n p A n r j
Address: J
Name (printed): A i L +`t PI • AOtiJe)\aN Tale:6.6.0r i glA ry IS OY
Signature: Date: 5 /81 1 —
i
t-ow° Akuo_DA 31vd•
Apr 6.2012 4:19:50 PM PDT p. 45
Stale of California
Deperinrent of General Services
PROCUREMENT DIVISION
Environmentally Preferable RJn ng Program
Post Consumer Recycled Content (PC RC) Percentages Worksheet
Sotfcitatlon No.: DGS IFS 1009-414
Bidder Name: FOttli
Revision Date: 51 k t z
Instructions:
Bld 1009-014
ATTACHMENTC
PC RC CerN7callat Workbook
REV 12r 7/2008
1. For all tine Items offered to the Slate, Blddentanimator shaitl list the minimum percentage, if not exact percentage, of postconstrnrer meterial within the
State Agency Buy Recycled Campaign RC)Reportabler Product Categories.
2. For packaging supplies used farsbzrphrg Ike flame offered to the Stater BidderlContractorshall list the minimum percentage, lino exactpercentage, of
pasfonsumer metedel within the State Agen4y Buy Recycled Campaign (SABRC) Reportable Product Categories.
3 1Ctfre fine Item does not t main any content type matching the SABRC Predl►cdmaterh l seism, ceders shaft enter WIA-in the the percentage columns.
4. If the Jute Item does not contains content type thetrnetches the SABRC Pmductlineferoal categovybut does notes ant post consumer recycled content
of ibis type, bidders shell enter 'YPIn the the percentage columns
5. Refer to SABRC Reportable Product Categories Table for more infcmmthat regarding categories listed
Page 1 of 1
or 6, 2012 4:19:50 PM PDT
ainViral Lfi
p. 44
Contract Line
Item Number CLAM
Item Description
SKU #
Nial
i
Cornpost
Lubricating Oils
Metal Products
Paint
Paper Products
Plastic Products
0.)
n
o
o
F
j=
Police interceptor Sedan and Utility
0%
nib
0%
0%
10%
nia
nfa.,
4%
nib
nla
nla
Item:
Notes:
Contact:
Antifreeze
0%. Team is working to implement some use of PCRC for 2014 model year.
Mary Ranger
Compost
not applicable:
-
Glass
0% (no information from glass team)
Melanie Lamas
Lubricating Oils
0% motor oil, trans oil
Rob Doss
Metal Products,
a minimum of 10% post -consumer contentin body shell sheet metal.
Terry Lassitter
Paint .
not app40ab1e, vehicle paint is noi*rater based, no recoverable material' avails
Rob Doss
Paper. Products
opt appilcpfe -very small paper- content •-
Plastic Products
4% overall plastic, 100% wheel liners and leaf screen, 100% pit induction
Shona Silber
Printing Papers
Tire -Derived Product
net applicable L veryernellpaper content
Not separated out see=Plastrc-Products
Bing Xu
Tires: �
not'applJcabl_e , rlo retreads forpursuit-retell vehicles
-
Pro -Forma below:.
-"� 3'1'`'^• ":' �5 .._:-' . ' Yc4. 3'._� Sa�� ^tea az� ,.^.,'� --"
Contract 1-12 - 23 -14
ATTACHMENT D
1/16/2012
2013 SEDAN POLICE INTERCEPTOR
PRICE LIST
PRICE LEVEL CODE 315
MODEL
SERIES
CODE
RASE VEHICLE PRICE
O CE
WA-IOLDBACK
$ 26,163
SUGGESTED
RETAIL
$ 25,360
Police '
Interceptor
P2M
Sedan Police interceptor AWD -
P2L
Sedan Police Interceptor FWD
26,781
27,210
ALL MODELS
Deattnation end Deliver"
J
TRIM SERIES
PKG.
,_ CODE
EQUIPMENT GROUPINVOICED
ER
W/HOLDBACK
SUGGESTED
RETAIL
Police
Interceptor
12P
661
13P
662
663
854
855
856
Poke interior Upgrade Package
Police Interceptor 81- Front Headlamp L1ghIrg BohiBon
Polioe Interceptor ale - Front Headlamp/ Poke Interceptor Rousing
Only
Police Interceptor 0 — Tall Lamp Lighting Solution
Police Interceptor 43 — Rear Lfphting Solution
Ponce Interceptor 44— Trunk
Pace Inter 10 tr Packagller ekage
Police interceptorDili — Rat y for the RoadPackage ckage
$ 338
703
109
370
424
438
1,432
3,187
$ 300
ass
123.
.415 .
475
605.
3,570�
OPTION
CODE
POWERTRAINS
DEALER
INVOICE
W)HOLDBACI(
Std
SUGSESTGD
RETAIL
Std .
ENGINE
998
3.51. VB TIVOT {Twin intiepen¢lrtt Variable Gam rninV)_
98T
8.51 V6 GM! ECoBOoetTM AWO Only t193mph Top Speed?
�EcoBBBost
$ 2,911
$ 3,
127
Speed Limited WantonNIC
1VIC
TRANSMISSION
•
44J
S.opeed Automatic Transmission .
Std
44C
8-Speed Auto atfoTr aasmipaion Moo Boost only]
SSid
SW
01/16112 - A - Ford Division
1 /16/2012
2013 SEDAN POLICE INTERCEPTOR
PRICE LIST
(PRICE LEVEL CODE 315)
OPTION
CODE
•
OTHER OPTIONS
DEALER
INVOICE
W/HOLDBACK
SUGGESTED
RETAIL
AVAILABLE ON ALL
41H
Engine Block Heater
$ 30 ,
$ 36
MODELS UNLESS
153
License Plate Bracket - Front
NC
NC
OTHERWISE NOTED
13C
Dark Car Feature —Cotalasy I?mp disable when any door Is
18
20
942
opened
Daytime Running temps
46
60
SIG
Pre -Wiring for grille lamp, siren, and speaker
46
50
21D
Spot Lamp - driver only (Incandescent Bulb)
187
210
21L
Spot Lamp - driver only (LED Bub)
303
340
21P
Spot Lamp — Dual (driver and passenger) (incandescent Bub)
344
385
218
Spot Lamp — Dual (driver and pessenger) (LED Bulb)
540
606
19T
Trurit Storage vault (includes lockeb)e door)
108
120.
191)
badge Delete (Pollee interceptor Badge Only)
NiC
WC
141
Two -Tone Vinyl Package 61
732
820
142
Two -Tone Vinyl Package #2
732
820
149
Two Tone Vinyl Package 93
612
688
144
Vinyl Word Wrap •
692
775
64L
Wheel Covers (18-Inch Full Face Wheel Cover)
54
60
96P
100 Waft Siren/Speaker (indudes bracket end pigtail)
260
290
T7B
Rear View Camera
214
240
53b1
SYNC TM Basic - Voice Activated Communication System
264
295
47J
Remeppeble (4) switches on steering wheel (less Voice, Not
135
150
Avail. w/ SYNC)
47K
Remeppable (4) switches on steering wheel (with Voice, '
requires SYNC)
135
150
638
Hidden Door Lock Plunger
120
136
63P
Eden Door Lock Plunger and Rear Door Handle Inoperable
139
155
1BL.
Rear Door Handles lnopereble7 Locks Operable
30
35
18G
Rear Door Handles Inoperable / Locks Inoperable
30
35
67D
Windows— Rear window power delete, operable from front driver
side swltchee
22
25
171
tat and 2nd row carpet floor covering
112
125
S8C
2nd Row Cloth Seats
54
60
2nd Row Cloth Seats (with 12P)
• NC
NC
97D
Rear Console Plate
30
35
43E
Keyed Alike — 1435x
46
50
438
Keyed Alike — 1284x
46
50
43D
Keyed Alike —0195X
46
B0
43F
Keyed Alike — 0576x
48
50
43J
Keyed Me —1111x
46
50'
85E
Ballistic Door Panels —Driver Front Door Only
1,384
1,550
65C
Ballistic Door Panels — Driver & Pass Front Doom
2,763
3,095
5513
BUS - Blind Spot Monitoring with Cross Traffic Alert
424
475
98K
Lockable Gas Cap for Easy Fuel Capiess Fuel Filler
18
20
59B
Perimeter Anti -Then Alarm - Activated by Hood, Door, or Decklld
108
120
60P
78R
62D
Remote Keyless Entry Key Fob (w/o Keypad, lass PATS)
Reverse Sensing
Electronics Tray (w/o Fan)
228
214
295
240
97T
Trunk circulation fan (mounted on package tray)
64
60
20P
Noise Suparession Bonds
05
96.
521
ESP Limited Maintenance Pien - 75,000 Miles, 5,000 Mile
670
750
•
Interval
522
ESP Limited Malntenande Plan - 75,000 Miles, 3,000 Mile
Interval
1,039
1,220,
523
ESP Limited Maintenance Plan -100,000 !Niles, 5,000 Mile
803
900
Interval
524
ESP Limited Maintenance Plan - 100000 Miles, 3,000 Mile
1,303
1460
Interval
525
ESP Umlted Maintenance Plan -125,000 Miles, 5,000 Mile
1,089
1,220
Interval
526
ESP Limited Maintenance Plan-125,000 Miles, 3,000 Mile
1,646
1,845
Interval
527
ESP Limited Maintenance Plan -150,000 Miles, 5,000 Mile
1,196
1,340
Interval
528
ESP Limited Maintenance Plan -150,000 Miles, 3,000 Mile
interval
1,964
2,200
01/16/12
-g_
Ford Division
05/07/12
2013 SEDAN POLICE INTERCEPTOR
POLICE INTERCEPTOR CONTENT
' Unique Sedan Police Interceptor Features Include:
MECHANICAL
• AWD Drlvetrain —Standard for enhanced handling precision -
and unsurpassed traction on wet or dry surfaces
• 3.5L Ti-VCT V6 FFV High efficient Police Calibrated (V6
displacement technology is optimal for long days spent Idling
or on the job)
• 3.51. V6 EooBoost® — Police Calibrated (Available)
• Brakes —Police calibrated high performance system
• 4-Wheel heavy-duty disc w/heavy-duty front and rear calipers
• Rotors — large mass for high thermal capacity and calipers
with large swept area
• Electric Power Assist Steering (EPAS)
• Transmission — 6-speed automatic, exclusively police
calibrated for maximum acceleration and faster closing
speeds
• Alternator — Heavy -Duty 220 Amp
• Battery — Heavy-Duty.750 CCA
• Cooling System — Heavy -Duty, large high volume radiator,
engine oil cooler and transmission oil cooler
• Engine Hour Meter
* Powertraln mounts — Heavy -Duty
EXTERIOR FEATURES
• Deflector Plate — Undercarriage deflector plate protect the
underbody, powertraln and chassis components
• Easy Fuel@ Capiess Fuel -Filler
• Wheels
— Heavy -Duty steel, vented with center cap
— Full size spare tire w/TPMS
INTERIOR FEATURES
• Column Shifter
• Flooring — Heavy -Duty vinyl, afters ease of cleaning,-iong
term durability
• Pedals — Power adjustable
• 2"d Row doors open extra wide. Door -panels simplified with
no cuphoiders or pockets for ease of cleaning
• Seats
— Front — Police grade cloth— 6-way power -adjustable,
manual lumbar, seatback foam designed to comfortably
accommodate a utility belt
— Built-in steel intrusion plates in both front-seatbacks
--- 2nd Row — Police grade vinyl, offer easy care for cleaning
• Simple Fleet Key (w/o microchip, easy to replace)
• Speedometer — Certified
+ Universal equipment tray atop Instrument panel (ideal for
radar and other police equipment)
POLICE UPFIT FRIENDLY
• Consistent 9-inch space between driver and passenger seats
for aftermarket consoles
• Console mounting plate
• Pass-thru opening for aftermafket wiring
• Headliner — Easy to drop
• Headlamps —Integrated LED police flashers (Available)
• Taillamps — Integrated police flashers (Avallablei
TECHNOLOGY
• ELIS®-- Blind Spot Monitoring wdh Cross Traffic Alert
(Available)
• Ford SYNC®- Hands -free communications with
programmable steering wheel -mounted controls (Available)
• Rear Video Camera (Available)
• Reverse Sensing (Available)
• Unique Steering Wheel (with up to 4-remappable
configurations —Available)
COMMONALITY.
• Commonality of parts between the Sedan and Utility
Interceptors include: Front brake calipers, rear brake calipers,
wheels, battery, 220 amp alternator, PTU, RDU and front -
'eats
• Maintenance Components — 011 filter, air filter, spark plugs,
front and rear brake pads, front and rear brake rotors and
tires
SAFETY / SECURITY HIGHLIGHTS
• AdvanceTrao® with Electronic Stability Control (ESC) police
tuned gyroscopic sensors work seamlessly with the ABS
• Ballistic Door -Panels (National Institute of Justice (NU)
certified to stop Type III and all lesser NIJ rounds)
• Exterior Key Locks — Driver, passenger "side and deckiid
• 75-mph Rear End Crash Tested
LATEST ORDER GUIDE UPDATES
• Updated Engine horsepower and torque ratings
Product Changes and Features Availability
Features, options and package content subject to change. Please check www.fmodealer.com or Dealer eStore for the most current information.
*1,1 New for this model year
-1-
Ford Division
05/01/12
2013 SEDAN POLICE INTERCEPTOR
STANDARD EQUIPMENT
MECHANICAL
• Alternator - 220 Amp
• Auxiiary Transmission 01t Cooler
• Battery-H.D. maintenance-free76M50 CCA
• Brakes - 4-Wheel Heavy -Duly Disc w/H.D. Front and Rear
Calipers
• Column Shifter - vinyl molded -black shift Imob
s Drivetraln -All-Wheel-Drive
• Dual J xhaust-Quasi
• Electric Power Assist Steering (SPAS) -Heavy-Duty
• Engine - 3.5L VB Ti-VCT FFV1(Note: FFV is not available on the
EcoBooseS engine)
• Engine Hour Meter
• Engine 011 Cooler
• Fuel Tank- 19.0 gallons
• independent Front Suspension with Front and Rear Stabilizer Asr
• Transmission--a-Speed Transmission
EXTERIOR
• Decklid - Cylinder Lock
• Door Handles -Painted Black
• Front Door -Lock Cylinders (Front Driver/Passenger)
• Glass -Solar -Tinted
• Grille - Black
• Headlights - Projector Halogen
• Mirrors - Black Caps (MIC), Power Electric Remote, Manual
Folding with Integrated Band Spot Mirrors (Integrated blind spot ,
mirrors not included when equipped with BLISS)
• Nameplate Badging-°Police Interceptor` and "Road Leaf" FFV
Bedging
• Roof Mount Antenna
• Tail Lampe Halogen with Halogen Decked Lamps •
• lime.
— 245/55818 AIS BSW
-- Wheels -18" x 8" painted black steel with Wheel Hub Cover
— Full Size Spare Tire P245/55Ri8 AIS BSW
— Full size 18" Spare w/TPM8
• Underbody Deflector
INTERIOR 1 COMFORT
• Cimats Control- Single Zone Manual
• Console Mounting Plate - Black e-Coat
• Door -Lacks
— Power
— Rear -Door Handles and Locks Operable
• Floor - Heavy -Duty Thermoplastic Elastomer
• Giove Box -Locking/non-illuminated
• Grab Handles - (1 - Front -passenger side)
• Lighting
— Overhead Console with 1" row task lights (driver!
passenger) r
— Dome Lamp-- i row (red/white)
— 2"° row overhead map light
• Pedals - Power ac>Eustabie
• Powerpolnts - 2 located in I/P lower close-out
• Scuff Plates -Front & Ftear
FFV Is not aval!abts In Green States. please reter to Emissions page
INTERIOR / COMFORT (continued)
• e Row Heavy -Duty Cloth Bucket
— 6-way power driver (man rein, man lumbar) with 2-way
manual passenger (man rein, no lumbar)
- Bui2-In steal intrusion plates in both front seatbacke
— 21° row Vinyl Bench
— 2°0 row door-panels-simplifed, r.c pockets or door
speakers, easy clean surface
• Speed (Cruise) Control
• Speedometer -Calibrated
• Steering wheal - Manual/I'ilt/ielescoping, Urethane Wrapped
with Speed Controls /Audio Controls
• Sun visors e.Non-Illuminated Driver/Passenger
• Trunk- Flat Load Floor
• Trunk Release Button (center at !/P)
• Universal equipment tray atop instrument panel (ideal for radar
and other police equipment)
• W nd wa
- Power, 1-touch Up/Down Driver -Side
— Window disable lock, 2°° Row
— Power Rear Windows Driver Switch Only
SAFETY & SECURITY
• AdvanceTree® wIESCID (Electronic Stability Controlru)
' w/Hydreulic Brake Assist
• Airless
— Front Airbags
— Side -Impact Airbags •
— Safety Canopy with rollover sensor
• Ant1-Lock Brakes (ABS) with Traction Control
• Battery saver feature
• Belt-Mlndenie (Front Drtver/Passenger)
• LATCH (Lower Anchors and Tethers for CHildren) system on
rear outboard seat Iocatiene
• SOS Post -Crash Alert Systere•
• Tire Pressure Monitoring System (TPMS)
FUNCTIONAL
• Easy Fuel® Capless Fuel -Filer
• Front door tether straps (Driver/Pessenger)❑
• MvFord®
— -AM/FM I CD / MPS Capable / Clock / 4 speakers
— 4.2" Color LGD Screen Center Stack "Smart Display"
— 5-way Steering Wheal Switches, Redundant Controls
• Power pigtail harness
• Simple Fleet Key (w/o microchip, easy to replace)
• Two-way radio pre -wire
• Wipers - intermittent Fbred interval
* e New far this model year
-2-
Ford Division
05/07/12
2013 SEDAN POLICE INTERCEPTOR
EQUIPMENT GROUP
Sedan Police interceptor AWD (inci. D&D)
Sedan Police interceptor FWD (incl. D&D)
3.5L V8 TI-VCT (Twin independent Variable Cam Timing)
3.SL V6 EcoeoostilD AWD Only — (148mph Top Speed)
Eco8ocere Speed Limited— (131mph Top Speed) (Req. EcoScost %%WD-39T/440)
6-speed Automatic Transmission
Order
Code
P2L
998
99T/44C
12T
44J
Police Interceptor SODA
Police interior Upgrade Package
• Cloth rear -seats
• Floor mats, front and rear
• 1w esid 21Q Row Carpet Floor Covering
• Fuil floor console with unique police finish pond '
- Note; Not available with the following Ponce Interceptor Pam: #4 (854), 05 (865), ire (errs)
0
8
0
0
•S
Police Interceptor #f a — Front Headlamp / Ponce interceptor Housing Only
. • Pre -frilled hole for side marker ponce use, does not include LED installed bulb
(eliminates need to drill housing assemblies)
• Pre -molded side warning LED holes with standard twist lock sealed capability (does
not include LED installed tights)
Not•: Not available with Police interceptor Package #1— 881
Note: Not available with Pollee interceptor Package #5 —858 .
Police interceptor #'i —Front Headlamp Lighting Solution
• Rase projector beam headlamp plus two (2) mufti -function ParkirumfWam (PTW)
bulbs for W Ig-wag simulation, end two (2) white hemispheric iighthead LED aide
warning tights.
Note: Included In Potice Interceptor Paclmge OiS —858
Police Interceptor ft2—Tall Lamp Lighting Solution
• Includes base lamp, plus two (2) rear integrated hemispheric red lighthead LEI} side
warning lights in faillamps
Nate: Included in Ponce Intermix Package #s —856
Police interceptor 03 -• Rear Lighting Solution
• includes two (2) backilt flashing linear high -Intensity LED lights (driver side red /
passenger side blue) mounted Inside back window; surrounds brake stop Kght)
• Includes two (2) linear high -intensity LED lights (driver side red / passenger side
blue) mounted on Inside trunk deckild (lights activate when deokfld le open)
Nate: included in Police Interceptor Package 06-866
12P
13P
661
662
683
0
0
0
0
0
Police interceptor #4 — Trunk Upfit Package
• Rear console mounting plate —contours through 2nd row; channel for wiring
• Wiring overlay harness with lighting and siren interface connections
• Vehicle Engine Harness:
— Two (2) light connectors — supports up to three (3) LED lights each (engine
compartment)
—One (1) grille LED light connector —supports two (2) LED lights
—Two (2) 50 amp battery ground circuits in power distribution juncttan block (In
trunk)
—One (1) 10-amp siren/speaker circuit (engine to trunk)
—Trunk circulation fan matniains airflow from cabin to trunk
—Trunk electronics tray (4 sq. ft) with 18" of travel when fully extended lacks
— Pre -wiring for grille LEDs and siren/speaker
Note: Not available with the following Pollee interceptor Peerages: #5 (856): e5 (856)
Police Interceptor 05 — Light Controller Package
! includes content from the following Police Interceptor Packages: 84 (854) phis:
• —Whalen Light Controller (PCC8R)
- Whelen PCC8R light Relay Center (electronics tray mounted)
— Light Controller / Relay Center Wiring (jumper harness)
— Whalen Specific Cable (console to trunk) couu ehr PCC8R to Control Head
Note: Not available wilt the following Police lnterceptarPscksgex#4 (85i};e5(656)
854
855
0
0
Pallas interceptor 06 — Heady for the Road Package
• Includes Poke interceptor Packages: #1 861; 92 662, 08, 663,04954 plus:
• — Whelan Cencom Sapphire Light Controller Head
— Whelen Cencom Sapphire Relay Center / Siren / Amp (mounted on Electronics
Tray)
— Light Controller/ Relay Cencom Wiring (wiring harness)
—Whelen Specific WECAN Cable (console to trunk) connects Cencom to Control 858
Head
— Grille linear LED Lights (Red / Blue)
— 100-Watt Siren /Speaker
—Trunk Storage Vault
—Hidden Door Look Plunger / Rear Door Handles Inoperable
Note: Not avertable with the following Police gdercaptorPackages: 04 (854); 45 (865)
See FCSD Service Manual for Terms end Conditions P Included in Eartoment Group, $ = Standdard EoutppieM, 0:Optional
` 3 - Ford Di skin
0
05/07/12 2013 SEDAN POLICE INTERCEPTOR
EQUIPMENT GROUP
r-;"« 7- -4 0 • [� .,1 ` T9'r`sk
0
License PlateBracik Front -�r.153Dark Car Feature — Courtesy lamp disable when any door Is opened 13C
Daytime Running Lamps .942
Pre -Wiring for grlile Imp, siren and speaker
Spot Lamp — driver only (Incandescent Bulb) (Not available with 21L, 21 P, 21 B)
Spot Lamp — driver only (LED Bulb) (Nat available with 210, 21P, 21 B)
Spot Lamp — Dual (driver and passenger) (Incandescent Bulb) (Not available with 210,
21L, 21 B)
Spot Lamp — Dual (driver and passenger) (LED Bulb) (Not available with 210, 21(., 21 P) 21 B
Trunk Storage Vault (includes lockable door)
Badge Delete (Pdioe interceptor Badge Only)
;5'4N 11-11715:0P:5 r7i
Two -Tone Vinyl Package 61 (Vinyl Wrap in Poiice White Only — YZ)
• Roof Vinyl
• RH/LH Front Doors Vinyl •
• RH/LH Rear -Doors Vinyl
Note: Not evadable wish the following Vinyl Packages: 42 (142);13 (143); (144)
Two -Tone Vinyl Package 62 (Vinyl Wrap in Police White Only — YZ)
• Roof Vinyl
• Hood Vinyl
• Decidid Vinyl
Note: Not available with the following Vinyl Peckagee: #i (141); #3 (143); (144)
Two -Tone Vinyl Package f13 (Vinyl Wrap in Police White Only —YZ)
• Roof Vinyl
• RH/LH Front Doors Only Vinyl
Note: Not available with the following Vinyl Pact egas: #1 (141); 02 (142); (144)
Vinyl Word Wrap
• "POLICE" located an LHFRH skies of vehicle (Vinyl Wrap in Folios White Only—YZ)
Note: Not available with the toilowing Vln Pace:#1 (141);f12 (142); #s (143)
r'aY p'i')
0
51Q • 0 / P-8541 P-855) P-856
210 0
21L 0
21P
19T
19D
141
142
143
144
Wheel Covers (18" Full Faoe Wheel Cover)
109 Watt Siren/Speaker (includes bracket and pigtail)
Rear View Camera (Includes Erectroohromic Rear View Mirror —Camara displayed in
rear view mirror)
SYNC Bozic —Votoe•Activated Communication System (Requires Reverse Sensing
, 76R)
Remappabie (4) switches on steering wheel (less SYNC (Not available with 47K)
Remappable (4) switches on steering wheal (requires SYNC
Rear-Door Handles Inoperable! Locks Operable'
Rear -Door Handles Inoperable / Locks inoperable'
Hidden Door -Lock Plunger w/Rear-door handles operabiee
Hidden Door -Lock Plunger w/Reer-door handles inoperable
� _ . ✓�.i�3.tg �.�_ Lai_.___ ...�� fF.. .� .i�
Windows Rear window power delete operable from front driver side switches 67D
lit and 2 Row Carpet Floor Covering (includes floor mats, front and rear)
96P
0
!
0
0
O
0
0
0 i P-12P
Row Cloth Seats
Rear Console Plate (Not available wilnterior Upgrade Pkg. — 12P)
iMg��ig:�'.:�1a''MLr W_ SMV' �i:i"Fr,:107,. �4
Keyed Alike —1435x
Keyed Atike —1284x
88C
97D
43E
43B
0 I P-12P -
0 I P-854 / P-8551 P-856
0
k Options 181_,189, 83e and 93P not available In any corn inallon.
• See FGSD Service Manual for Terms and Condltfons
.4-
P = included in_E0Uioment Group, S= Standard EauipmerlL 0 Qptional
Ford Divislon
05/07/12 2013 SEDAN POLICE INTERCEPTOR
EQUIPMENT GROUP -
Keyed Alike — 0135x 43D
Keyed Alike— 0576x 43F
Keyed Alike-1111x 4311
Ballistic Door -Panels,— Driver & Pass Front Doors
BLISO — !Mind Spot Monitoring With Cross Traffic Alert (Manual fold -away mirrors1 lateet.
w/o memory, w/o puddle }amps)
Lockable Gas Cap for Easy Fuel ab Capless Fuel-Riler
Perimeter Anti -Theft Alarm —Activated by Hood, Dear, or Decklid (Requires Key Fob
80p) (Late AvailabiNt3)
Remote Keyiess-Eniny Key Fob (win Keypad, lees PATS) (Not available with Keyed Alike
feature)
PIA Circulation Fan (mounted inside tnink)
Noise Suppression Bonds
*.2 See FCSD Service Manual for Terms and Conditions
/ P-854 / P-855 / P-855
97T 0 / P-854 / P-13S5 / P4356
P included in Equipment GrouP,S Standard Equipment 0 Optional
- 5 - rord Division
05/01/12 2013 SEDAN POLICE INTERCEPTOR
FUNCTIONAL EQUIPMENT
AXLE AVAILABILITY
Final Drive Ratio W 3.16
FWD Police interceptor
Final Drive Ratio = 3.39
AWD Police Interceptor
(Non-EcoBoost )
Final Drive Ratio W 3.16
AWD EcoBoosLL Police
interceptor
18' 5-spoke painted
black steel wheels
with center caps (51"
wheel is full-size
spare) — Standard
* a New for this model year
WHEEL AVAILABILITY
18" 5-spoke full face
wheel covers with
metal caps
Optional (6414
- 6 - Ford Division
lnteria, Colon
_C'hareoat._
• Black
05/01/12 2013 SEDAN POLICE INTERCEPTOR
COLOR & TRIM AVAILABILITY
''-'"SJaYt Rtrlice.intnrceptar redain'Palica lnLFrr:otp.b
Cloth Front Buckets / Vinyl Rear
Paint Name
Arizona Beige Metallic
LMr
Smokestone Metallic
it Deep impact Blue
Norsea Blue Metallic
Royal Blue
Light Ice BIueN Metallic
Front —Unique Heavy -Duty Cloth, Front Bucket Seats Driver 8-way Power track (forelaft.
up/down; tilt with manual recline, 2-way manual lumbar).
Passenger — 2-way manual track (lore/aft: with manual recline)
Rear— Vinyl
COLOR OFFERINGS
o'l4fPR't'a�'��ir
0170,011
Order Code
KR
Tt
ut•yL'�1.�};yiefnl'.�f.�^�L,f. A..��~,��_ .. � .,�7 _ '�7�.l e
*Ingot Silver Metallic itX
*Oxford White
VINYL WRAP COLOR TREATMENT OFFERINGS
Vinyl Wrap Cedar*
— Accent Color Wrap for Vhryl Packages 141, 142, 143, 144
Accent Color Code
DOOR HANDLE COLOR SCHEME
1. Oxford White (YZ) exterior painted vehicles will receive Oxford White (YZ) painted door handles
2.'Ai" other exterior pointed vehicles wit receive Ebony Black (UA) painted door handles
* e Neyu for this model veer
-7-
■ •Avallabie
Ford Division
05/01/12
2013 SEDAN POLICE INTERCEPTOR
EMISSIONS
EMISSIONS REQUIREMENT LOCATIONS
CAL;FOitNfA EMISSIONS STATE ......... ... „ ......._.
CA, CT, MA, MD, ME, NJ, NY, OR, PA, Ri, VT, WA
CROSS BORDER STATES » .. »» _...... ..........�
AZ, DC, DE, ID, NH, NV, OH, VA, WV
FEDERAL EMISSIONS STATES .. ....................
I Ramalning States / Regions
EMISSIONS STANDARD/OPTIONAL EQUIPMENT
FEDERAL / NON-CALIFORNIA EMISSIONS SYSTEM ....
Standard equipment for vehicles destined tor Federal
Emissions State or Cross Border State dealer destinations
Equipped on vehicles when Code 236 ar 423 is applicable
for California Emissions State dealer destinations.
Note: Flexible -fuel vehicle (FFV) system is standard
equipment for vehicles with 3.5L Ti-VCT VS engine ,
destined for Federal Emissions State or Cross Border
State dealers and is only available with a Federal
emissions system (FFV system not available with Code
422, and requires Codes 936 or 423 if applicable for
California Emissions State dealer destinations).
CALIFORNIA EMISSIONS SYSTEM ......................._. 422
Available on 3.5L Ti.VCT V6 gasoline only engine (non-
FFV) and 3.51., EcoBoost? engine
Required code for Califomia Emissions States registration
unless Codes 938 or 423 are malleable.
Optional code for Cross Border State deafer orders.
CALIFORNIA EMISSIONS SYSTEM NOT REQUIRED............ 423
Dealers ordering a vehicle without a California Emission
System and which is being soldfdelivered to a California
Emissions State dealer are also required to use Code 423
to attest either that the vehicle is not being registered in a
Caftornia Emissions State or that Code 93B Is applicable:
Note: In Maine, Rhode Island and Vermont, dealers cannot
use Code 423 for customers outside of California
Emissions States locations (except Public
Service/Emergency Vehicles -Code 936).
CALIFORNIA EMISSION EXEMPTION FOR PUBLIC
SERVICE/EMERGENCY VEHICLES _ 936
This exemption may only apply in certain California
Emissions States. Ordering dealer is responsible to contaot
the proper state authorities for clarification on qualifying
exempted vehicles for registration. Only available on
vehicles sold for authorized public service or emergency
service use. Must also use Code 423 when ordering.
The State of Washington has unique nisi; (WAC 173-423-
080) on exempting emergency vehicles without California
emissions if another vehicle with California emissions that
meets the customer's needs 1s available. Code 936 is not
slowed and Code 422 is required for vehicles delivered to
a Washington State dealer unless an exemption is
• obtained from the Department of Ecology.
FEDERAL EMISSIONS STATE DEALER ORDER FOR
CALIFORNIA EMISSION STATES REGISTRATION........._,.... 93N
Federal Emissions State dealers ordering a California
Emissions System (Code 422) are also required to use
Code 93N to attest that the vehicle is to be registered in a
California Emissions State. Nate:11 is a violation of Federal
law for a Federal Emissions State dealer to sell a vehicle
with a California Emissions System for registration in a
Federal Emissions State, unless the vehicle also meets
EPA standards (i.e., 50-state emissions).
ENGINE BLOCK HEATER . . .......... ..... ......» .._ 41 H
Standard and only available in AK, MN, ND, SD, MT, WI
and WY states. Other states available vie FCSD
NOTE: Fleet Only - Engine block heater optional In all states with
valid FiN code-
* Q New for this modal Year
- 8 - Ford Division
05101t12
2013 SEDAN POLICE INTERCEPTOR
POWERTRAIN
FUEL ECONOMY
ENGINE D1SPL. TRANSMISSION
6-Cylinder - FWD
8.5L Ve TI-VCT FFV
-C; under - A1.CD
8.5LV$TI-VCTFFV
6-Cylinder - ALNI7
6- Automatic
6-Speed Automatic
ADJUSTED .
CITY HIGHWAY
SO -STATE
ESTIMATED
ANNUAL FUEL
COMBINED COSTS
TBD TBD
ENGINE HORSEPOWER AND TORQUE RATINGS
ENGINE DISPL.
6-Cylinder FtW 3
IIEESZEMEMIll
6-Cylinder - At'JI7
3.5L V8 Ti-VCT FFV
6.51_ V6 GTD1
TRANSMISSION
6.Speed Automatic
8•S • . ed Automatic
NOMINAL
COMPRESSION
RATIO
sa-STATE
HORSEPOWER
TORQUE
H.P.@RPM
FT. LBS.®
RPM
10.8:1
286 @ 6,500
254 @ 4,000
10.8:1
288@6500
254 @ 4,000
6-Speed Automatic 10,0:1
'Ratings achieved using 93-octane fuel. The use of 67-ociane may reduce performance
*= New f•rthis model ear
365 @ 5,5001
350 @ 1,500 -
5,0001
Ford Division
1/16/2012
2013 UTILITY POLICE INTERCEPTOR
PRICE LIST
(PRICE LEVEL CODE 315)
MODEL
'
SERIES
CODE
BASE VEHICLE PRICE
DEALER
INVOICE
WfHOLDBACK
SUGGESTED
RETAIL
Police
Interceptor
AWD
K8A
Utility Poke Interceptor AWD
8 27,896
$ 29,705
FIND
K7A
UtGRy Pollee interceptor FWD
26,936
28/§80
825
AU. It:OOEL8
•
Destination and Dativery _ _ _
825
TRIM SERIES
DRIVE
PKO.
.CODE
ECUIPMENT GROUPS
DEALER
INVOICE
%HOLDBACK
SUGGESTED
RETAIL
Police
Interceptor
6 U
Police InteNor Upgrade Package
$ 341
5390
88P
Police Interceptor 921a- Front Headlamp /Pace
Interceptor Housing Only
110
125
66A
Police Ir•.lerceptor 821- Front Headlamp L1gMtng
Solution
797
• 915
8613
Police Interceptor 422—Tali Lamp Lighting Solution
371
425
66C
Pa9ce Inlerceaxrll23—Rear Lighting Solution
398
455
876
Police Interceptor 924—Cargo Wiring U9ltt Package
1,169
1,340
87H
'PolicceInterceptor 425— Ready For the Road Package
2,979
3,415
DRIVE
OPTION
CODE
POWERTRAINS
DEALER
INVOICE
Mt/HOLDBACK
SUGGESTED
RETAIL
ENGINE
99R
3.7L TIVCT V8 FFV Engine
Bid
Std
TRANSMISSION
44C
6-Speed Auton►e & Traneinleslon
Std
Std
Q1/18/12
-A- Ford Division
1/16/2012
2013 UTILITY POLICE INTERCEPTOR
PRICE LIST
PRICE LEVEL CODE 315
OPTION
CODE
OTHER OPTIONSDEALER
INVDIC
IN/HOLDBACK
SUGGESTED
RETAIL
AVAILABLE ON ALL.
41H
_
Engine Block Heater
$ 90
$ 35
MODEL$ UNLESS
153
License Pale Bracket - Front
NC
NC
OTHERWISE NOTED
43D
Dark Car Feature —Courtesy lamp disable w! en any door
opened
. 17
20
042
Daytime Running
177
Dame Lamp-Red/White in Cargo Area
46
50
•
60A
51Y
Pre -Wiring for grille Tamp, siren, and speaker
Spot Lamp -driver only Inx anndescent Bulb)
(LED
45
187
50
g15
51R
Spot Lamp -driver only Sub)
345
395
512
Spot tamp— Duel (driverandpassenger) (incandescent Bulb)
306
350
51S
Spot Lamp— Dual (driver and passenger) (LED Bulb)
541
620
16D
Badge Delete (Police interceptor Badge Only)
C
NIC
92G
Glass - Soiar Tint 2nd & 3rd Row
105
120
92R
Glass - Soler TIM and Row Only
75
85
68Z
Root Rack Side Rate - Black
87
100
91 A
Tyro -Tone Vinyl Package 21
733
840
918
lYroTone Vinyl Package #2
733
840
91C
Two -Tone Vinyl Package 43
B11
700
'
91,13
Vinyl Wad Wrap
. 694.
705
848
Wheel Covers (18" Full Face Wheel Cover)
83
fit
18X
100 Watt Siren/Speaker (includes bracket and pigtail)
262
300
•
218
Rear View Camera
213
245
53M
SYNCAI Basic - Voice Activated Communication System
256
225
61 R
Ranappable (4) switches on steering wheel (less Voice, Not
Avall. wi SYNC)
136
155
615 '
Remale (4) switches on Sleeting wheel ( th Voice, requires
136
155
52H
Hidden Door cock Plunger
122
140
52P 1
Hidden Door Lock Plunger and Rear Door Handle Inoperable
140
120
88L
Rear Door Handles Inoperable / Looks Operable
30
35
66G
Rear Door Handles inoperable /Looks Inoperable •
30
85
18W
Windows — Rear window power delete, operable from front driver
side switches
22
-
2,2
16C
letandEndrowcarpetfkxxcovering
110
125
88F
and Flow Cloth Seats
end Row Cloth Seats (Ind w/ 65U
59
130
60
Mei
8511
Rear Console Plate (Not avail )v1 Interior Upgrade Pkg - 651.1)
30
g5
58E
Keyed Alike —1435x
45
50
598
Keyed Alike —1284x
45
SO'
SOD
Keyed Alger-0135x
45
50
S9P
Keyed Alike—057fix
45
50
59J
Keyed Alike —1111x
45
50
900
. Ballistic Door Panels — Driver Front Door Only
1,384
1,585
•
90E
Ballistic Door Panels — Driver & Pass Front Doors
2,766
3170
558
BUS - Blind Spot Monitoring with Cross Traffic Alert
428
490
19L
Lockeble Gas Cap for Easy Fuel Capless Fuel Filler
17
20
593
Perimeter Antl-'iheit Alarm - Activated by Hood, Door, or Deoklid
105
120
595
ixemote Keyless Entry Key Fob (wlo Keypad, lees PATS)
227
260
76R
Reverse Sensing
240
275
17A
Aux Air Conditioning
532
610
60R
Noise Suppression Bonds
87
100
50A
ESP Limited Maintenance Plan -75,000 Miles, 5,000 Miie interval
672
770
5013
ESP Limited Maintenance Plan - 75,000 Mlles, 3,000 Mile Interval
' 1,092
1,250
SOC
ESP Limited Maintenance Plan -100,000 Miles, 5,000 We
Interval
803
920
SOD
ESP limited Maintenance Plan-100,0001 tiles, 3,000 Mlle
interval
1,305
1,495
50E
ESP Limited Maintenance Plan-125,000 Miles, 5,000 Mlle
• Interval
1,092
1,250
5OF
ESP Limbed Maintenance Plan -125,000 Miles, 3,000 Mlle
Interval
1,650
1890
500
.ESP Limited Maintenance Plan -150,000 Miles, 5,000 Mlle
interval
1,200
1,375
5011
ESP Limited Maintenance Plan -150,000 Miles, 3,000 Mite
interval -
1,968
2,255
01/1 6/1 2
-B-
Ford Division
05/01/12
2013 UTILITY POLICE INTERCEPTOR
POLICE INTERCEPTOR CONTENT
Unique Utility Police Interceptor Features Include:
MECHANICAL
• AWD Drivetrain - Standard for enhanced handling precision
and unsurpassed traction on wet or dry surfaces
• 3,7L Ti-VCT V6 FFV High efficient Police Calibrated (V6
displacement technology Is optimal for long days spent idling
or on the job
• Brakes - Police calibrated high pertormarice system.
4-Wheel heavy-duty disc w/heavy-duty front and rear calipers
• Rotors - large mass for high thermal capacity and calipers
with large swept area.
• Electric Power Assist Steering (ERAS)
• Transmission - 6-speed automatic, exclusively police
calibrated for maximum acceleration and faster closing
speeds
• Alternator - Heavy -Duty 220 Amp11
• Battery - Heavy -Duty 750 CCA
• Gonling System - Heavy-duty, large high volume radiator,
Engine oil cooler and transmission oil cooler
• Engine Hour Meter
• Powertraln mounts -Heavy-Duty.
• Wheels
— Heavy-duty steel, vented with center cap
— Full size spare tire w/TPMS
INTERIOR FEATURES
• Cargo Area -Spacious area far pQflce equipment
• Column Shifter
• Flooring - Heavy-duty vinyl, offers ease of cleaning, long
term durability
• Pedals - Power adjustable
▪ Seats
— Front - Polloe grade cloth - 6-way power -adjustable
Manual lumbar, seatback foam designed to comfortably
accommodate a utility belt
— Built -In steel intrusion plates in both front-seatbacks
— 2"d Row - Police grade vinyl, offer easy Care for cleaning
— Lifbgate access with manual lock cyllnder
• Simple Fleet Key (w/o microchip, easy to replace) •
• Speedometer- Certified
• Universal equipment tray atop instrument panel (ideal for
radar and other police equipment)
POLICE UPFIT FRIENDLY
• Consistent g-inch space between driver and passenger seats
for aftermarket consoles
• Console mounting plate
• Dash pass-thru cpening for aftermarket wiring
• Headliner - Easy to drop
• Headlamps - integrated LED police flashers (Available)
• Talilamps - Integrated police flashers (Available)
TECHNOLOGY
• BUS® - Blind Spot Monitoring with Cross Traffic Alert
(Available)
• Ford SYNC® -Hands -free communications with .
programmable steering wheel -mounted controls (Available)
• Rear Video Camera (Available)
•• Reverse Sensing (Available)
• Unique Steering Wheel (with up to 4-remappable
configurations -Available)
COMMONALITY
• Commonality of parts between the Sedan and Utility
Interceptors include: Front brake calipers, rear brake calipers,
wheels. battery, 220 amp alternator, PTU, RD U and front -
seats.
• Maintenance Components - 011 fflter, air filter, spark plugs,
front and rear brake pads, front and rear brake rotors and
tires.
SAFETY / SECURITY HIGHLIGHTS
• AdvanceTrac®w/RSCS (poll Stability ControITM) police
tuned gyroscopic sensors work seamlessly with the ABS
• Ballistic Door -Panels (National institute of Justice (NU)
certi fled to stop Type III and all lesser NU rounds) (Available)
• Exterior Key Locks - Driver, passenger side and liftgate
• 75-mph Rear End Crash Tested
LATEST ORDER GUIDE UPDATES
• Emissions Update
Product Changes and Features Availability
Features, options and package Content subject to thongs. Please check www.fmcdealer.com or Dealer eStore for the most current information.
-1 - Ford Division
MECHANICAL
• Alternator - 220-Amp
• Axle Ratio-3.65 (AWD), 3.39 (FWD)
• Battery - H_D. maintenance -free 78A/750-CCA
• Brakes - 4-Wheel Heavy -Duty Disc w/H.D. Front and Rear
Calipers
• Column Shifter
• Drivetrain - Ail -Wheel Drive
• Electric Power Assist Steering (EPAS) - Heavy -Duty
• Engine - 3, 7L Ve Ti-VCT
• Engine Hour Meter D
• Engine Oil Cooler
• Fuel Tank -18.6 gallons
• Suspension - independent front & rear
• Mansell ee on - 6-speed automatic
EXTERIOR
• Antenna, Roof -mounted
• Cladding - Lower.bodyside cladding (Black)
• Door Handles - Black (MIC)
• Exhaust True Dual
• Front Door -Lock Cylinders (Front Driver! Passenger/
L'rftgate) .
• Glass - 2nd and 3i0 Rcw Privacy Glass
• Grille - Black
• Headlamps -Halogen Projector (8i- Functional)
• Llftgate - Manual 1-Piece - Fixed Glass w/Door-Lock
Cylinder
• Mirrors - Black Caps (i,RIC), Power Electric Remote, Manual
Folding with Integrated Spotter (integrated blind spot mirrors
not included when equipped with BLIS®)
• Spare - Full size 16" Tire w/TPMS
• Spoiler - Painted Black
• Tail lamps - LED
• Tailgate Handle - Painted Black
• Tires - 245/55R18 A/S 8SW
• Wheel -Lip Molding -Black (MC)
• Wheels - 18"x 8.0 painted black steel with wheel hub cover
• Windshield -Acoustic Laminated
INTERIOR / COMFORT
• Cargo Hooks
• Climate Control - Single -Zone Manual
• Door -Locks
— Power
— Rear -Door Handles and Locks Operable
• Floor - Flooring - Heavy -Duty Thermoplastic Elastomer
• Glove Box - Locking/non-Ruminated '
• Grab Handles - (1 - Front -passenger side)
• Liohtlnp
Overhead Console with sunglass holder
— '01 row task lights (driver and passenger)
-- Dome Lamp-1" row (red/white)
— 21" row overhead map light
• Mirror- Day/night Rear View
• Particulate Air Filter
• Power Adjustable Pedals (Driver Dead Pedal)
• Powerpoints - (2) Flrst•Row
• Scuff Plates - Front & Rear
• AseLs
▪ 1 Row Police Grade Cloth Trim, Dual Front Buckets
— 1" Row - Driver 6-way Power track (fore/aft. Up/down, tilt
with manual recline, 2-way manual lumbar)
— 1" Row - Passenger 2-way manual track (fore/eft. wlh
manual recline)
— Built-in steel intrusion plates in both driver/passenger
seatbacks
--- 2" d Row Vinyl, 60/40 Split Bench Seat (manual fold -flat,
no tumble) -fixed seat track
• Speed (Cruise) Control
05/01/12
2013 UTILITY POLICE INTERCEPTOR
STANDARD EQUIPMENT
The foliowin a items are std. 2013MY UTILITY POLICE INTERCEPTOR vehicle:
• Speedometer -Calibrated
• Steering Wheel -Manual / Tiltt, Urethane wheel finish
w/Sliver Painted Bezels) with Speed Controls and Redundant
Audio Controls
• Sun visors, color -keyed, non illuminated
• Universal Top Tray -Center of I/P for mounting aftermarket
equipment
• Windows, Power, 1-touch Down Driver -Side with disable
feature
SAFETY/SECURITY
• AdvanceTrac® w/RSC® (Roil Stability Control?M) w,Hydraulc
Brake Assist
• Airbags, el generation driver & front -passenger, side seat,
Roil Curtain Airbags end Safety Canopy®
• Anti -Lock Brakes (ABS) with Traction Control
• Battery saver feature
• Belt -Minder® (Front Driver / Passenger)
• Child Safety Locks (capped)
• LATCH (Lower Anchors and Tethers for CHIldren) system on
rear outboard seat location
• Seat Belts, Pretensioner/Energy. Management System
w/adJustable height in 1" Row
• SOS Post -Crash Alert System+
• Tire Pressure Monitoring System (TPMS)
FUNCTIONAL
• Easy Fuelt6 Capless Fuel -Filler
• Front door tether straps (driver/passenger)
• MvForde
— AM/FM / CD / MP3 Capable / Clock / 6 speakers
— 4.2" Color LCD Screen Center -Stack "Smart Display'
— 5-way Steering Wheel Switches, Redundant Controls
• Power pigtail harness
• Simple Fleet Key (w/o microchip, easy to replace)
• Two-way radio pre -wire
• Windows - Rear Defroster
• Wipers - Front Speed -Sensitive Intermittent; Rear Dual
Speed Wiper
AWD ONLY MODELS INCLUDE
• Recovery Hooks, Rear Only
-2-
Ford Division
05101/12 2013 UTILITY POLICE INTERCEPTOR
EQUIPMENT GROUP
Series/RateOption
Utility Police interceptor AW D (incl. D&D)
Code
• K8A•3
Police Interceptor
500A
Utility police interceptor FWD Incl. D&D)
K7A
0
3.7L V6 Th-VCT FFV with 6-Speed Automatic Transmission
QUIP ENT CROUt
Interior Upgrade Package
-1" end 2"d Row Carpet Floor Covering.
- Cloth Seats - Rear
-Center Floor Console less shifter w/unique Police consote1nish plate - includes Console
Top Plata - Finish 3 (incl. 2 cup holders)
- Floor Mats, font and rear (carpeted)
Note: Not available with Police interceptor Package #24 - 670
Note: Not available ?Mt Pee interceptor Package #2e-- 67H
88R / 44C
S
65U
0
.
Police interceptor #21 a -Front Headlamp / Police Interceptor Housing only
- Pre -drilled hole for side marker police use, does not include LED Installed bulb (eliminates
need to drill housing assemblies)
- Pre -molded side warning LED holes with standard twist loots sealed capability (does not
Include LED installed lights)
Note: Not available with Pollee Interceptor Package #21- MIA .
Note: Not available with Pollee tntereeptor Package #25- 67H
66P
0
Police Interceptor 21- Front Headlamp Lighting Solution
- Includes base projector beam headlamp plus two (2) multi -function Park/turn/Warn (PTW)
bulbs for Wig -wag simulation and two (2) white hemispheric Ilghthead.LED side warring tights.
Note: Not available with Pore Interceptor Package #25— 87H
68A
0
Police hiterceptor22--Tail Lamp Lighting Solution - Includes base lamp plus two (2) rear integrated hemispheric lighthead white LEDside
warning lights In teillamps
Note: Not available with Police interceptor Package #25-67H .
66U
0
Police Interceptor 23 -- Rear Lighting Solution
- includes two (2) backlit flashing linear high -intensity LED lights (driver's side red / passenger
aide blue) mourned to inside lftgate glass)
- includes two (2) backlit fleshing linear high -intensity LED lights (driver's side red / Passenger
side blue) installed on inside lip of liftgate (lights activate when iiftgate is open)
Note: Not available with Pollee interceptor Package #25-67N
6SC
0
Police interceptor 24 - Cargo Wining Upft Package
-Rear console pieta - contours through 2"d row; channel for wiring
-Wiring overlay harness with lighting and siren Interface connections
- Vehicle Engine Harness:
S7th,
0
o Two (2) light connectors - supports up to three (3) LED fights each (engine compartment)
o Two (2) light connectors- supports up to three (3) LED lights each (engine compartment)
- Two (2) 50 amp battery ground circuits in right hand rear -quarter power dhab ibution junction
block
- One (1) 10-amp siren/speaker circuit (engine to cargo area)
- Whalers Lighting PCCSR Control Head
-Whelan PCCSR Light Relay Center (mounted behind 2"d row seat)
-Light Controller / Relay Center Wiring (jumper harms)
-Whelan Specific Cable (console to cargo area) Connects PCC8R to Control Head
- Pre -wiring for grille LEDs and siren/speaker
Note: Not available with Pollee kntercepbor Package #25-6711
Politer interceptor 25- Ready for the Road Package:
Alidn Complete Package -Includes Police interceptor Packages ill SSA, #22 66B, #23
66C, #24 54G* plus
-Whalen Cencom Sapphire Ught Controller Head
-Whalen Canoom Sapphire Relay Center !Siren/Amp (mounted behind 2' row seat)
- Light Controller / Relay Cenccm Wiring (wiring harness)
-Whalen Specific W ECAN Cable (console to cargo area) connects Concern to Control Head
-Grille linear LED Lights (Red / Blue)
-100--Watt Siren / Speaker
- Hidden Door -Lock Plunger / Rear -Door Handles inoperable
(*) -LESS the following items from Package it67Q (Higher level components included):
o W helen Lighting PCCSR Control Head
o Whalen PCCSR Light Relay Center (mounted behind 2"d row seat)
o Light Controller / Relay Center Whing (jumper harness)
Note: Not available with the following Police interceptor Packages+4/21-(85A); #22 (6aB); #28 (66C); #24
OM)
57E1
0
'.� �v�` Q,'-` 13 �' s '+4,4 *3i,- i 5 7. y , " r54 .1 .r r ,. A:l
e�i, lf-f .:L 4 L.:r1.:' � l.ki.iCl.ii ':5 .,w i'�J"il ✓- 1tilr 5
3 1
?.-.
41H
_..
Engine Block Heater
0
*= See FCSO Service Manual for Terms and Conditions ' P = Included In Equipment Group, S = Standard Eguloment. Q = Qplional
-3-
rd Division
05/01/12
,EQUIrMENrGRotip
.. f.�- i'_'1ag�s'i1nL�'=�:tiS �'�'ii-C��•"dR[��ia
2013 UTILITY POLICE INTERCEPTOR
EQUIPMENT GROUP
Dark Car Feature - Courtesy lamp disable when any door Is opened
Spot Lamp -Dual (driver and passenger) (LED Bulb)
Glass - Solar Tint 21d and Sul Row (Deletes Privacy Glass}
Glass - Solar Tint 2"d Row Only (Deletes Privacy Glass)
+ham.., a,.rn...c..�R:V-,'2tS:
Taro -Tone Vinyl Package O1 (Vinyl Wrap in Police White Only YZ) • Roof Vinyl -
• RH/LH Front Doors Vinyl
• RH/LH Rear -Doors Vinyl •
Note: Not available With the following Vfr d Packages: #2 (918); Se (91 C); (e1 D)
Two -Tone Vinyl Package 42(Vinyl Wrap in Police White Only -VI)
• Roof Vinyl
• Hood Vinyl'
Note: Nat available with the following Vinyl Packages: S1 (91AJ; #3 (91C); (91p)
Two -Tone Vinyl Package #3 (Vinyl Wrap in Police White Orly-YZ)
• Roof Vinyl
• RHst.H Front Doors Only Vinyl
Note: Not available with the following Vinyl Packages: S1 (e1A); e2 (ei 2); (91 D)
Vinyl Word Wrap
• "POLICE" located on LHVRH sides of vehicle (Vinyl Wrap In Police White Only- YZ)
Note: Not available with the follows Vinyl Pe
:,r�F following ckages:lal(91A);fJ2(9if�;#3(B1C)
[MVA y{ r n t7��� ,r �v tic
--.'�;...iz,WL'� n .aA '.: rt_.�.ti 4.7 .7.; ,1 `a;y dS 41.,:11j ,.'s.> l4 ;,f.� 3i�ea �' � [i7•,.
Wheel Corers (18" FuJi Fah
1 DO Wattt SirerVSp{eaker (includes bracket and pigtail)
Rernappabto (4) switchess on steering wheel (with SYNCS)
his}}r,�}}�� .,.;J ,: lv�i�:�3d.,�`TL'. � •`.-;r�� L`fi;r.._-� ;rts
Hidden Door Lock Plunger w/Rear-door handes Inoperable'
,farf% Ui-OHEa4"��" 3'iy`t n LAT +�'}s I-551W �- rv^'�.rs,��+'.I;-ro`i �'�•'4.k -`
3 �aS1�G1�. �(C �"��17,�. v:-fit.....,, �1 �. u1,..'5... � �*yi�J�41�1��..Y�
Windows Fear window power delete, operable from front driver side switches
.,i' lii i't. l(•�fGG �ti4. T li{ Y -" '4 .( ::i �rriJ
sl,lrs�ar6F sf:?fV��ss .�, ssrrt'a:t;f`£ar�Cl y��:3�tl'i t?S
l"and 2 ' row carpet floor covering (includes floor mats, front and rear)
Rear Console Plate (Not available with Interior Upgrade Pkg.- 8811)
'Options SOL, G8m, 52tt and 52P not available in any combination
• = See FCSD Service Manual for Terms and Conditions P Included In Equipment Group, E - Standard Equipment, 0 = Optional
- 4 - Ford Division
05/01/12 2013 UTILITY POLICE INTERCEPTOR
EQUIPMENT GROUP
E0U1PiNEriGROUP
Keyed Alike — 1435x
Keyed Nike — 1264x
Keyed Nike — 0135x
Keyed Nike — 057Sx
Keyed Alike — 1111x
it .:. �r3?'l :,;? ; .,'K'a ,� _T� y ._ �•,.
-Ballistic Door -Panels— Driver & Pass Front Doors
1_ookeble Gas Cap for Easy Fuels Capless FuekFilier
Perimeter Anti-Thelt Alarm — Activated by Hood, Door, or Deckled (Requires Key Fob) (Late
Availability)
Remote Keyless -Entry Key Fob (w/o Keypad, less PATS) (Not available with Keyed Alike)
Reverse Sensing
t f I:7. +� zj,,rr--a 777 A 4 31:. 5:n. tifr2 77'
• Aux Air Condttioning -
Noise Suppression Bonds (Ground Straps)
150,000-mites (assumes 3,000-mlie Intervals a 50 service events)
' . See FCSD Service Mandel for Terms and Conditions 9 = included In Ectulpment Group, S = Standard Equipment, 0 = Optional
5 - Ford Division
11/01/11 2013 UTILITY POLICE INTERCEPTOR
FUNCTIONAL EQUIPMENT
AXLE AVAILABILITY
Final Drive Ratio .: 3 39
FWD Police Interceptor
Final Drive Ratio = 3.65
AWD Police Interceptor
WHEEL AVAILABILITY
18" 5-spoke panted black
steel wheels with center
caps (511' wheel is full-size
spare) —
Standard
18" 5-spoke full face wheel
covers wkh metal clips —
Optlonal (648)
S..Stendsrd O=O.tiona] R keed0• on
-6- Ford.' son
02/01/12
t� iftiSr1 Pokce,lnterceptor
2013 UTILITY POLICE INTERCEPTOR
COLOR & TRIM AVAILABILITY
Cloth Front Buckets /Vinyl Rear
thiiity,Po{iee4+Ttercen tor.
Front — Unique Heavy -Duty Cloth, Front Bucket Seats
Driver 6-way Power rack (forelalt.up/down, tilt with manual
recline, 2-way manual lumbar).
Passenger— 2-way manual track (fare/aft with manual
recline)
Rear — 60/40 Split Vinyl.
COLOR OFFERINGS
Interior Color Charcoal
Black
EXTERIOR COLOR
POLICE
Smokestone Metaalc Y
it Deep Impact Blue
Order Code
Charcoal Black
:b 7 sosrt. .c Y. y. � 2 l ,T ffi � t �.W s y ✓ ,-.1` .�y.� - � i Y
;ie `i'�'�ry7�S;'�'r '"t i`� �i7#r 31fRs.}S� (z"fn''''cu iY�� 4' • c, y �. C -fix? r i-;.�F-it' �1r4,, ° i � j'r� ., i� ,''�i �+�1 `�-r'�i` u 4 �. ,(!`.`"Aa — � r—'
Iratt
"F.v,kti tit
eat
k!z }l fry eti }{����..'.'t. fi��.�.��ar�a Y�rS✓. +,.;f � .�er.,+4 t,y �, y�T,.� ✓+�Y4. �Y�.,..�t __..r.F �r rL,
*Ingot Silver Metallic
*Orford White
VINYL WRAP COLOR TREATMENT OFFERINGS
Police White
NOTE Not aveiable with exterior paint Oxford White (YZ)
' Ascent Color Wrap for Vinyl Packages DIA, 91 B, 91C, 9f D
■ = Avallebie,
- 7 - Ford Ilvlslon
03/20/12
2013 UTILITY POLICE INTERCEPTOR
EMISSIONS
EMISSIONS REQUIREMENT LOCATIONS
CALIFORNIA EMISSIONS STATES ........».......
CA, CT, MA, Mb, ME, NJ, NY, OR, PA, RI, VT, WA •
CROSS BORDER STATES
AZ, DC, OE, lb, NH, NV, OH, VA, WV
FEDERAL EMISSIONS STATES „.......
Remaining States/Resions
EMISSIONS STANDARD/OPTIONAL EQUIPMENT
FEDERAL/NON-CALIFORNIA EMISSIONS
Standard equipment for vehicles destined for Federal
Emissions State or Cross Border State dealer destinations.
Equipped on vehicles when Code 936 or 423 is applicable
for California Emissions State dealer destinations.
Note: Flexible -fuel vehicle (FFV) system• is standard
equipment for vehicles with 3.7L Ti-VCT V6 engine
destined for Federal Emissions State or Cross Border
State dealers and Is only available with a Federal
emissions system (FFV system not avaiabte with Code
422, and requires Codes 936 or 42311 applicable for
California Emissions State dealer destinations).
CALIFORNIA EMISSIONS SYSTEiM .». ».„»....„............... 422
Available on 3.7LT1-VCT V6 gasoline only engine (non-
FFV)
Required code for California Emissions States registration
unless Codes 936 or 423 are applicable.
Optional code for Cross Border State dealers.
CALIFORNIA EMISSIONS SYSTEM NOT R1 QI11REfl._...»... 423
Dealers ordering a vehicle without a California Emissions
System and which is being sold/delivered to a California
Emissions State dealer are also required to use Code 423
- to attest either that the vehicle is not being registered In a
California Emissions State or that Code 936 is applicable.
Note: in Maine, Rhode Island and Vermont, dealers cannot
use Code-423 for customers outside of California
Emissions States locations (except Public
Service/Emergency Vehicles -- Code 936).
CALIFORNIA EMISSIONS EXEMPTION FOR PUBLIC
SERVICE/EMERGENCY VEI•IICLES .»»» „ __.....„.. , » 935
This exemption may only apply in certain California
Emissions States. Ordering dealer Is responslbleto contact
the proper state authorities for clarification on qualifying
exempted vehicles for registration. Only available on
vehicles sold for authorized public service or emergency
service use. Must also use Code 423 when ordering,
The State of Washington has unique rules (WAC 173-423-
080) on exempting emergency vehicles without California
emissions 11 another vehicle with California emissions that
meets the customer's needs is available. Code 936 is not
Mowed and Code 422 is required for vehicles delivered to
a Washington State dealer unless an exemption Is
obtained from the Department of Ecology.
FEDERAL EMISSIONS STATE DEALER ORDER FOR
CALIFORNIA EMISSIONS STATES REGISTRATfOIy„._........ 83N
Federal Emissions State dealers ordering a California
Emissions System (Code 422) are also required to use
Code 93N to attest that the vehicle is to be registered in a
California Emissions State. Note: It is a violation of Federal
law for a Federal Emissions State dealer to sail a vehicle
with a California Emissions System for registration In a
Federal Emissions State, unless the vehicle also meets
EPA standards (ie 50-state emissions).
ENGINE BLOCK HEATER
....».»._ 41 }1
Standard and only avaiabie in AI<, MN, ND, SD, MT, WI
and WY states. Other states available via FCSD
NOTE: Fleet only — Engine block heater optional in all stares
with valid FIN code,
MISCELLANEOUS
COVRequired ......»„...» ................»..»„..„».... » » ._. 7DV
Priced DORA.»...... »..........».„..„......................».».......».........» Cp9
SNOW PLOW USAGE
Not recommended for snow Plowing.
- 8 - Ford Div(siora
1 •
r lb
05/01/12
2013 UTILITY POLICE INTERCEPTOR
POWERTRAIN
FUEL ECONOMY
SOSTATE
F.E. LABEL
ESTIMATED
ANNUAL
FUEL COST
MEMO:
UNADJUSTED
COMBINED
ADJUSTED
CITY HIGHWAY
ENGINE DISPL, TRANSMISSION
_
-AWD-
3.7L Ti•VCT V6 FFV 6S • -ed Automatic
IsD
TED
TsD
• Teti
VD-,_
3.71. TFVCT Vs t+FV &Speed Automatic
TBD
TBD _
TBD
TED
ENGINE HORSEPOWER AND TORQUE RATINGS
NOMINAL
COMPRESSION
RAT1O
50•STATE '
HORSEPOWER'
TORQUE'
ENGINE DNSPL TRANSMISSION
N.P. @ RPM
FT. LBS. RPM
3.TL TI.VCT V6 FFV
'Preliminary ratlnya
0-Sp.ad Automelte
10.811
904 @ 6S00
279 FL Lbs.
4000rpm
9 - Ford Division
t ict ync: contract
Page 1 of 1
` BIID•
WHERE BUYERS AND SELLERS MEET
1- o?n -. - Units P!_US -ePiocure Sulkier i ProcurePQinte ConliaCls Partners
i
CONTACT US
1111
View Contract
ltroutUsk_
Title Enforcement Vehicles
Contract'Niirmt>er 1-12-23-14
'Department State Wade
71111111111111111111111111111111111111,1
tiescrlptibn This contract covers the estimated two (2) year requirements of the State of California for 2013 or current niodef year Enforcement Vehicles. This
contract is MANDATORY for all State of California departments and available for use by participating local.govermental agencies.
Star t Date May 25, 2012
Vis36ttlty. Agency Only
Eaapiration Date May'24; 2014
Total contract Amount $040
Mandatory Mandatory
Contacts Timothy P Smith PHONE: 916-373-4451 EMAIL: Timothy.Smith@dos.ra.00y
Supplier # - Folsom.Lake Ford
Solicitation #1009-014 - Enforcement Vehic]eE
Classifitatiohs [251017] Safety and rescue vehides
[921015] Polite services
Contract Documents
,_yt'° j^°"7 .... =-.>.-lw�.: *7.-"7;:.�-�-. .. .. --`- ve rf•!- ' �.; -haw%----r-�.=�.. -- h.. -- :
iIE ,'C oaY S�7'S b :`�i d �_•.' _ i ?. •. - . ?, N .. � �.Y {. _•
• 1-12-23-14 Contract Notification User Instructions.pdf [download)
4n 1-1 -23-14 Attachment A - Contract Priclno.xls (dawn oadl [Maxi
t f 1-12-23-14 Attachment Bi.pdf [flownloadl
1-12-23-14 Attachment 82.odf fdownlceld
ti 1,-12-23-24Attachrnent C.odf {download]
L1. 1-12-23-14Attachrneiit..D,RQf [download]
+
E1 Vehicle Acceptance Letter,olf (download]
Contract items
P2M
KBA
.Kl.11/i1LiA..VUC.�L,'i1Ti„Lu'T
Police Interceptor Sedan
Police Interceptor Utility: Vehicle
Folsom Lake'Ford $a�,242 iO anal
Folsom) Cake i ord $2ec578•0O each
Hr• - li... ; PI US :gPrr ur4• .,w` .., Proc w
Moe
ut U. Conr c ris , e.' coo :rar I- .31 ; Privacy tccess;i Ihty F_edback Siremap
https://www.bidsync,corn/DPX?ac=agencycontview&contid=100717 1/15/2013