HomeMy WebLinkAboutWhillock Contracting Inc, Paradise Creek Park Site Remediation and Improvements, CIP No. 18-07 - Change Order #19 - 2019PROJECT PROFESSIONALS CORPORATII
MO JAN =9 P 5 43
CHANGE ORDER MEMORANDUM TATY OF NATIONAL. CITY
October 30, 2019
To: Stephen Manganiello
Director of Engineering & Public Works/City Engineer
Engineering and Public Works Department
City of National City
From: Alex Preciado
Project Manager
Project Professionals Corp
Project: Paradise Creek Park Site Remediation & Improvements
CIP No.: 18-07
Subject: Change Order No. 19
Change Order No. 19 provides for:
The cleaning, priming, painting the backside of structures adjacent to the south end of Paradise Creek Park.
Supporting Information:
To compliment all park and street improvements, it was determined to paint the backside of the adjacent
structures. This will bring an aesthetic value to the park and existing structures and will require minor to no
maintenance for City crews.
Time Adjustment:
It is recommended that 0 working days be added to the contract time.
Cost Adjustment:
The City and the Contractor agreed that this work shall be captured under a total lump sum of $3,517.50. The
pay method and amount have been reviewed by the Construction Manager and are considered fair and
reasonable.
Iiiiili
Proj t Manager Date
CALIFORNIA
NATIONAL Cirr
INCORPORATED
PARADISE CREEK PARK SITE REMEDIATION & IMPROVEMENTS CHANGE ORDER NO. 19
CIP NO. 18-07 October 30, 2019
Contractor: Whitlock Contracting Inc.
PO Box 2322
La Mesa, CA 91943
This Change Order modifies Contractor's and the City's obligations and rights under the
abovementioned contract. This change order is not effective until approved by the City.
Time adjustment:
Zero (0) working days are added to contract time for the cleaning, priming, and painting the backside of
structures adjacent to the south end of Paradise Creek Park.
Cost of Change Order:
The City and the Contractor agree that the Contractor shall clean, prime and paint
(2 Coats) the backside of structures per the attached exhibit. The primer and paint
shall be per the attached specifications. All work associated with cleaning, priming
and painting (2 coats) the backside of structures adjacent to the south end of
Paradise Creek Park will be captured under an agreed lump sum price of $3,517.50.
$3,517.50
Total Cost of Change Order
$3,517.50
Recommended by Project Manager:
Date: 121r-116
By signing this Change Order the Contractor confirms that he/she is completely familiar with and has fairly
negotiated its price, terms and conditions. If this Change Order is approved, Contractor will provide all of the
equipment, materials and labor necessary to provide a complete work as described above at that the price
stated herein. Contractor confirms that the price is fair and complete and represents all costs associated with
the work, including but not limited to all equipment, materials, labor, supervision, overhead, fees, bonds,
insurance, profit, etc. and that there will be no further compensation. All of the terms and conditions of the
original contract documents are incorporated herein. The signer for the Contractor confirms that he/she is
authorized to bind the Contractor to this Change Order.
Date: Z.- I 7 -
Agreed and Accepted by Contractor
(Print Name and Title)
Approved by City Engineer:
Date: ((23/ o
Approved by City Manager:
(Required for change orders $25,000 and above)
Date:
,— CAL1�IIfN1�
NATIONAL L enrir
• � V.V3
NcoJpoRATED
PARADISE CREEK PARK SITE REMEDIATION & IMPROVEMENTS CHANGE ORDER NO. 19
CIP NO. 18-07
DATE: October 30, 2019
WORK PERFORMED BY: Whillock Contracting
DESCRIPTION OF WORK: Clean, Prime, Paint the Backside of Structures Adjacent to PCP
SUBCONTRACTOR
Unit
Qty
Rate
Total
1)
Palmer Painting
LS
1.00
3,350.00
3,350.00
Sub -total Subcontractor:
Prime Contractor Markup (5%):
TOTAL SUBCONTRACTOR:
$ 3,350.00
$ 167.50
3,517.50
GRAND TOTAL:
Palmer Painting Co.
2160 Fletcher Pkwy M-2
El Cajon, CA 92020
Office (619) 460-3985
Ca. Lic. # 751475
Name / Address
Whillock Contracting
346 Front St
El Cajon Ca 92019
579-0700 fax 579-0955
www.palmerpainting.com
Proposal
Date
Proposal #
10/25/2019
8248
Description
Total
Exterior Painting at 2101 Wilson Ave, National City
Prime and paint backside of metal building, back of wood shed, and block walls, si Coo1T'3 a fArcrr
Areas to be powerwashed prior to painting
Finish paint Dunn Edwards "Evershield"
We propose to furnish all material and perform all labor to complete the job located at the address stated atove.
Payment terms to be agreed upon before start date. All surfaces to be painted will be properly prepared, and
highest quality material will be applied with strict attention to quality and professionalism.
ACCEPTANCE OF PROPOSAL
The above prices, specifications and conditions are satisfactory and are hereby accepted.
You are authorized to do the work as specified.
Date Signature
3,350.00
the
Total
$3,350.00
THE #1 CHOICE OF
PAINTING PROFESSIONALS®
EVERSHIELD°
Exterior
Flat Paint
EVSH10
green
W
50 g/L VOC"
DESCRIPTION: EVERSHIELD® Flat is an ultra -premium exterior, ultra -low VOC, 100% acrylic flat paint that provides maximum protection
against UV color fade, mildew, efflorescence, water intrusion, and film failure (grain -cracking, peeling, blistering). EVERSHIELD Flat can be
used on properly prepared and primed masonry, concrete, tilt -up, block, stucco, plaster, wood, and metal. Advanced technology and premium
ingredients provide unparalleled performance, durability, coverage, and adhesion. Can be used down to surface and air temperature of 35°F.
PRODUCT INFORMATION
SOLVENT TYPE: Waterborne
RESIN TYPE: 100% acrylic
FINISH (ASTM D 523): Flat: 2-4% on a 60° meter; 4-8% on an 85° meter
COLORS: Stock colors: Swiss Coffee.
TINT BASES: L Tintable White, M Medium, U Ultra Deep
VISCOSITY@77°F/25°C (ASTM D 562): 102-110 KU
MAXIMUM VOC CONTENT
50 g/L (as supplied)
MAXIMUM RAVOC (Reactivity -Adjusted VOC)
25 g/L
SOLIDS BY VOLUME (ASTM D 2697)
39.5%±2%
SOLIDS BY WEIGHT
55.3% ± 2%
WEIGHT PER GALLON (ASTM D 1475): 11 60 lbs.
COMPOSITION BY WEIGHT
Pigment-39.9% Vehicle-60.1%
'Prime pigments 20.9 Acrylic resins 13.8
Reinforcing pigments 19.0 Water & additives 46.3
'Prime pigments include titanium dioxide (TiO2), plus all other pigments directly adding
to the hiding power of this paint.
RECOMMENDED FILM THICKNESS PER COAT
Wet: 3.8 mils Dry: 1.5 mils
PRACTICAL COVERAGE PER COAT AT RECOMMENDED DRY FILM THICKNESS
Approximately 350-400 sq. ft. per gallon, depending on surface conditions and
application techniques.
THINNING RECOMMENDATION: This coating is intended to be applied without
thinning or diluting under normal environmental and application conditions. If
necessary to maintain good workability, add up to 1/4 pint (4 fl. oz.) of clean water
per gallon of coating.
AVERAGE DRY TIME@77°F/25°C (ASTM D 1640)
To touch: 30-60 minutes Recoat: 2-4 hours
Dry times and recoat times are temperature, humidity and film thickness dependent.
APPLICATION EQUIPMENT: Brush, roller, airless spray
PACKAGING: One -gallon, five -gallon containers
STORAGE: Store in a dry area. Protect from freezing. Protect from temperatures
above 110°F for extended periods of time. Extreme temperatures may cause
paint to become unusable. See Paint Storage Best Practices Technical Bulletin at
dunnedwards.com for more information.
CLEANUP: Warm, soapy water
DISPOSAL: For information on local options to dispose of unwanted leftover
paint, call Dunn -Edwards Customer Service at 1-888-DEPAINT or visit
www.dunnedwards.com. Do not mix with other products.
CONFORMS TO: ARB 2007 SCM & CALGreen 2016; MPI Approved Product #10;
CRGI Green Wise Certified
SAFETY DATA SHEET: Available at www.dunnedwards.com
SURFACE PREPARATION: All surfaces must be cured, clean, dry, and free from
dirt, dust, rust, stains, grease, oil, mildew, wax, efflorescence, bond -breakers,
and other contaminants. Remove all loose, peeling, or chalky paint by sanding,
scraping, or other appropriate methods. Repair all cracks, holes, and other
surface imperfections with a suitable patching material. Repaired surfaces should
then be sanded smooth and dusted clean. Glossy surfaces should be dulled to
provide a roughened surface for good adhesion.
General Paint Asteroid / CL 2657N / #5f4e43 Hex Color Code The
hexadecimal color code #5f4e43 is a medium dark shade of orange. In the
RGB color model #5f4e43 is comprised of 37.25% red, 30.59% green and
26.27% blue. In the HSL color space #5f4e43 has a hue of 24° (degrees),
17% saturation and 32% lightness. This color has an approximate
wavelength of 584.94 nm.
SPECIAL INSTRUCTIONS
• CAUTION: Scraping or sanding surfaces of older buildings (especially pre-
1978) may release dust containing lead or asbestos. EXPOSURE TO LEAD
OR ASBESTOS CAN BE VERY HAZARDOUS TO YOUR HEALTH. Always
wear appropriate personal protective equipment during surface preparation,
and finish cleanup of any residues by water -washing all surfaces. For more
information, see Dunn -Edwards brochure on "Surface Preparation Safety" or
call EPA's National Lead Information Hotline at 1-800-424-LEAD, or visit www.
epa.gov/lead or /asbestos, or contact your state or local Health Department.
• This product can neither cause nor prevent or cure the growth of mold, mildew,
or other forms of fungus. Excessive moisture and inadequate ventilation are the
main conditions that promote their growth. Correct any such conditions before
painting.
• This paint contains a preservative which inhibits the growth of mildew on
surface of this paint film.
• When the air temperature is at 35°F, substrates may be colder; prior to painting,
check to be sure the air, surface, and material temperature are above 35°F and
at least 5°F above the dew point. Avoid using if rain or snow is expected within
2-3 hours, as in colder temperatures, it may require longer time before the paint
film cures enough not to be affected by rain or snow. Do not apply at air or
surface temperatures below 35°F or when air or surface temperatures may drop
below 35°F within 48 hours.
Standard latex primers cannot be used below 50°F. See the specific primer
product information sheet for that product's application conditions.
PRIMERS
MASONRY
Stucco:
Tilt -up concrete.
Poured -in -place:
Plaster:
Brick:
Concrete block:
Smooth trowel:
WOOD
Trim, sash, fascia:
Rough -sawn:
T1-11 siding:
SYNTHETIC WOOD
Masonite:
Hardboard:
MDO siding:
METAL
Ferrous: BLOC -RUST® Premium (BRPROO) or
ENDURAPRIME' Metal Primer (ENPROO)
Non-ferrous: ULTRASHIELD® Galvanized Metal Primer (ULGM00) or
BLOC -RUST® Premium (BRPROO)
Galvanized steel: ULTRASHIELD® Galvanized Metal Primer (ULGM00) or
•ULTRA -GRIP® Premium (UGPROO)
}
SUPER-LOC` Premium (SLPROO) or
EFF-STOP' Premium (ESPROO)
Smooth BLOCFIL Premium (SBPROO) or
SUPER-LOC" Premium (SLPROO)
i
f
i
f
EZ-PRIME"Premium (EZPROO)
ULTRA -GRIP" Premium (UGPROO)
'for incidental use on galvanized
"This product has been tested and certified by Coatings Research Group Inc.,
an international paint industry -organized ISO -accredited testing laboratory,
to meet performance and environmental standards as shown on
www.greenwisepaint.com. Dunn -Edwards is a member of CRGI.
tce • Los Angeles, California 90058-5507 • (888) DE PAINT® dunnedwards.com
337-2468
THE #1 CHOICE OF
PAINTING PROFESSIONALS°
ULTRA -GRIP® Premium
Interior/Exterior
Multi -Surface Primer
UGPROO-1
DESCRIPTION: ULTRA -GRIP® Premium is an ultra -low VOC, acrylic multi -surface primer designed for a wide range of interior and exterior
applications. It provides excellent adhesion to properly prepared drywall, wood, and masonry, as well as hard -to -stick surfaces, such as
aged alkyd, aluminum, galvanized metal, vinyl, fiberglass, and select plastics. ULTRA -GRIP Premium has outstanding stain blocking, strong
tannin resistance, great hide, and excellent enamel holdout. It applies smoothly, dries fast, and is compatible with all Dunn -Edwards latex
and alkyd finishes.
PRODUCT INFORMATION
SOLVENT TYPE: Waterborne
RESIN TYPE: Acrylic
FINISH (ASTM D 523): 7-14% on a 60° meter
COLORS: White. ULTRA -GRIP Premium may be tinted with up to 2 fl. oz. of
Dunn -Edwards ZTC Zero VOC colorant per gallon.
TINT BASES: White
VISCOSITY67rF/25°C (ASTM D 562): 95-105 KU
MAXIMUM VOC CONTENT
50 g/L (as supplied)
MAXIMUM RAVOC (Reactivity -Adjusted VOC)
20 g/L
SOLIDS BY VOLUME (ASTM D 2697)
40.5% ± 2%
SOLIDS BY WEIGHT
53.0% ± 2%
WEIGHT PER GALLON (ASTM D 1475): 10.53 lbs.
COMPOSITION BY WEIGHT
Pigment-27.4% Vehicle-72.6%
*Prime pigments 15.1 Acrylic resins 23.0
Reinforcing pigments 12.3 Water & additives 49.6
*Prime pigments include titanium dioxide (TOa), plus all other pigments directly adding
to the hiding power of this paint.
RECOMMENDED FILM THICKNESS PER COAT
Wet: 4.9 mils Dry: 2.0 mils
PRACTICAL COVERAGE PER COAT AT RECOMMENDED DRY FILM THICKNESS
Approximately 275-325 sq. ft. per gallon, depending on surface conditions and
application techniques.
THINNING RECOMMENDATION: This coating is intended to be applied without
thinning or diluting under normal environmental and application conditions. If
necessary to maintain good workability, add up to 1/4 pint (4 fl. oz.) of clean
water per gallon of coating.
AVERAGE DRY TIME@77°F/25°C (ASTM D 1640)
To touch: 30-60 minutes Recoat: 2-4 hours
Dry times and recoat times are temperature, humidity and film thickness dependent.
APPLICATION EQUIPMENT: Brush, roller, airless spray
PACKAGING: Quart, one -gallon, five -gallon containers
STORAGE: Store in a dry area. Protect from freezing. Protect from temperatures
above 110°F for extended periods of time. Extreme temperatures may cause
paint to become unusable. See Paint Storage Best Practices Technical Bulletin at
dunnedwards.com for more information.
CLEANUP: Warm, soapy water
DISPOSAL: For information on local options to dispose of unwanted leftover
paint, call Dunn -Edwards Customer Service at 1-888-DEPAINT or visit
www.dunnedwards.com. Do not mix with other products.
CONFORMS TO: ARB 2007 SCM & CALGreen 2013; CHPS Section 01350; LEED
2009 IEQ Credit 4.2; LEED v4 EQ Credit 2; MPI Approved Product #17, #134; CRGI
Green Wise Certified Gold; FDA Guidelines for Resinous & Polymeric Coatings
SAFETY DATA SHEET: Available at www.dunnedwards.com
SURFACE PREPARATION: All surfaces must be cured, clean, dry, and free from
dirt, dust, rust, stains, grease, oil, mildew, wax, efflorescence, bond -breakers,
and other contaminants. Remove all loose, peeling, or chalky paint by sanding,
scraping, or other appropriate methods. Repair all cracks, holes, and other
surface imperfections with a suitable patching material. Repaired surfaces should
then be sanded smooth and dusted clean. Glossy surfaces should be dulled to
provide a roughened surface for good adhesion.
SPECIAL INSTRUCTIONS
• CAUTION: Scraping or sanding surfaces of older buildings (especially pre-1978)
may release dust containing lead or asbestos. EXPOSURE TO LEAD OR ASBESTOS
CAN BE VERY HAZARDOUS TO YOUR HEALTH. Always wear appropriate personal
protective equipment during surface preparation, and finish cleanup of any residues
by water -washing all surfaces. For more information, see Dunn -Edwards brochure on
"Surface Preparation Safety" or call EPA's National Lead Information Hotline at 1-800-
424-LEAD, or visit www.epa.gov/lead or /asbestos, or contact your state or local
Health Department.
• This product can neither cause nor prevent or cure the growth of mold, mildew, or
other forms of fungus. Excessive moisture and inadequate ventilation are the main
conditions that promote their growth. Correct any such conditions before painting.
• ULTRA -GRIP Premium seals and blocks out most household stains, such as
crayon, pencil, ink, and felt marker. After priming stained areas, test that the stain
has been sealed by applying the topcoat to a small area. More than one coat may be
necessary on severe stains. ULTRA -GRIP Premium may block minor dried water
stains, however, a solvent -based stain blocking primer, such as pigmented shellac, is
recommended.
• Galvanized metal must be cleaned with a solvent or a water-soluble degreasing
cleaner to remove all oils prior to etching. Change wiping material and cleaning
solution frequently so the oils are removed from the surface, not just spread around.
Surface should then be etched with Supreme Chemical Metal Clean & Etch (ME01).
• ULTRA -GRIP Premium can be used on bare ferrous metal surfaces (interior only)
provided that they are free of rust, mill scale, and other contaminants. Before any
surface preparation is attempted, oil and grease must be removed by employing
SSPC-SP11 Power Tool Cleaning to Bare Metal to remove mill scale, rust, or other
contaminants and to leave a roughened surface.
• Before applying over previously painted surfaces, ULTRA -GRIP Premium should be
tested for adhesion and compatibility.
• On Level 4 and 5 Drywall Finishes, thin ULTRA -GRIP Premium with 10% of clean
water (3/4 pint per gallon / 1/2 gallon per 5-gallon) for best penetration.
• Do not apply when the air or surface temperature is below 50°F.
USE AS A PRIMER FOR
WALLBOARD & MASONRY
Drywall:
Stucco:
Concrete: ULTRA -GRIP® Premium (UGPROO)
Brick:
WOOD -INTERIOR
Trim, doors:
WOOD -EXTERIOR
Trim, sash:
T1-11 siding:
SYNTHETIC W00D
Masonite:
Hardboard:
METAL
Ferrous:
Non-ferrous:
OTHER SURFACES
Fiberglass:
Plastic:
ULTRA -GRIP® Premium (UGPROO) or
INTER-KOTE® Premium (IKPR00)
ULTRA -GRIP® Premium (UGPROO) or
EZ-PRIME® Premium (EZPROO)
} ULTRA -GRIP® Premium (UGPROO)
BLOC -RUST® Premium (BRPROO),
ULTRASHIELD® Galvanized Metal Primer (ULGM00), or
ULTRA -GRIP® Premium (UGPR00) - INTERIOR ONLY
ULTRA -GRIP® Premium (UGPROO) or
ULTRASHIELD® Galvanized Metal Primer (ULGM00)
} ULTRA -GRIP® Premium (UGPROO) - INTERIOR ONLY
6/16 (8/15) DUNN-EDWARDS CORPORATION • 4885 East 52ND Place • Los Angeles, California 90058-5507 • (888) DE PAINT I dunnedwards.com
337-2468
THE tt1 CHOICE OF
PAINTING PROFESSIONALS`
SAFETY DATA SHEET
SDS FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
The following Safety Data Sheet (SDS) is being provided pursuant to requirements of the
Fed/OSHA (29 CFR 1910.1200) and Cal/OSHA (8 CCR 5194) Hazard Communication
Standards. The health and hazards information given here is based on data believed to be
accurate by Dunn -Edwards Corporation; we do not, however, assume any liability for the
accuracy or completeness of this information. We neither suggest nor guarantee that any
hazards mentioned are the only ones that may exist. All persons intending to rely on any
recommendation, or to use any technique, equipment, or material mentioned should first satisfy
themselves that they can meet all applicable safety and health standards.
The following SDS supersedes any previously issued SDS for each product covered. The
reader is advised to destroy any obsolete SDS and refer only to this SDS. As permitted by
OSHA, each SDS may apply to a class of products which have similar hazards and contents.
Products covered by this SDS are listed below:
ACBL10-0: ACRI-BUILD Flat
ACHS10-0: ACRI-HUES Flat
ACHS30-0: ACRI-HUES Eggshell
ACHS50-0: ACRI-HUES Semi -Gloss
ACWC10-0: ACRI-WALL Flat Concentrate
ACWL10-0: ACRI-WALL Flat Ready -To -Use
ACWL30-0: ACRI-WALL Eggshell
ACWL50-0: ACRI-WALL Semi -Gloss
AQUA10-1: AQUAFALL Flat
AQUA30-1: AQUAFALL Eggshell
AQUA50-1: AQUAFALL Semi -Gloss
ASHL30-0: ARISTOSHIELD Eggshell
ASHL40-0: ARISTOSHIELD Low Sheen
ASHL50-0: ARISTOSHIELD Semi -Gloss
ASHL70-0: ARISTOSHIELD High Gloss
AWLL50-0: ARISTOWALL Semi -Gloss
AWLL60-0: ARISTOWALL Gloss
BIPROO-1: BLOCK -IT Premium
BRPROO-2-RO: BLOC -RUST Premium, Red Oxide
BRPROO-2-WH: BLOC -RUST Premium, White
DURA50-0: DURAFLO Semi -Gloss
DURA50-1: DURAFLO Semi -Gloss
DURA60-0: DURAFLO Gloss
DURA60-1: DURAFLO Gloss
ENCT30-0: ENDURA-COAT Eggshell
ENCT50-0: ENDURA-COAT Semi -Gloss
ENCT60-0: ENDURA-COAT Gloss
ENPROO-0-GR: ENDURAPRIME, Gray
ENPX50-0: ENDURACAT Semi -Gloss
ESPROO-1: EFF-STOP Premium
ESSLOO-0: EFF-STOP Select
EVER10-0: EVEREST Flat
EVER20-0: EVEREST Velvet
EVER30-0: EVEREST Eggshell
EVER50-0: EVEREST Semi -Gloss
EVSH10-3: EVERSHIELD Flat
EVSH2O-2: EVERSHIELD Velvet
EVSH2O-3: EVERSHIELD Velvet
EVSH30-2: EVERSHIELD Eggshell
EVSH30-3: EVERSHIELD Eggshell
EVSH40-2: EVERSHIELD Low -Sheen
EVSH40-3: EVERSHIELD Low -Sheen
EVSH50-2: EVERSHIELD Semi -Gloss
EVSH50-3: EVERSHIELD Semi -Gloss
EVSH60-2: EVERSHIELD Gloss
EVSH60-3: EVERSHIELD Gloss
EZPROO-1: EZ-PRIME Premium
FPSLOO-1: FLEX -PRIME Select
FTXS10-0: FLEX-TEX Smooth
IKPR00-1: INTER-KOTE Premium Zero VOC
PMCE10-0: CONTRACTOR'S EDGE Flat
PMCE30-0: CONTRACTOR'S EDGE Eggshell
PMCE50-0: CONTRACTOR'S EDGE Semi -Gloss
PRWL00-0: PREP -WALL Drywall Surface Conditioner
QKWL10-0: QUIK-WALL Flat
continued
09/23/19
SDS FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS continued
SBPROO-0: Smooth BLOCFIL Premium
SBSLOO-1: Smooth BLOCFIL Select
SFSLOO-1: SURFACO Select
SLPROO-2: SUPER-LOC Premium
SPMA10-1: SUPREMA Flat
SPMA20-1: SUPREMA Velvet
SPMA30-0: SUPREMA Eggshell
SPMA40-0: SUPREMA Low Sheen
SPMA50-0: SUPREMA Semi -Gloss
SSHL10-0: SPARTASHIELD Flat
SSHL20-0: SPARTASHIELD Velvet
SSHL30-0: SPARTASHIELD Eggshell
SSHL40-0: SPARTASHIELD Low Sheen
SSHL50-1: SPARTASHIELD Semi -Gloss
SSHL60-1: SPARTASHIELD Gloss
SSHV10-0: SPARTASHIELD VA Flat
SWLL10-0: SPARTAWALL Flat
SWLL20-1: SPARTAWALL Velvet
SWLL30-1: SPARTAWALL Eggshell
SWLL40-1: SPARTAWALL Low Sheen
SWLL50-1: SPARTAWALL Semi -Gloss
SWLR10-0: SUPER -WALL Flat Ready -To -Use
SZRO10-0: SPARTAZERO Flat
SZRO20-0: SPARTAZERO Velvet
SZRO30-0: SPARTAZERO Eggshell
SZRO40-0: SPARTAZERO Low Sheen
SZRO50-0: SPARTAZERO Semi -Gloss
UGPROO-1: ULTRA -GRIP Premium
UGSLOO-1: ULTRA -GRIP Select Zero VOC
ULDM00-0-GR: ULTRASHIELD DTM Gray Primer
ULDM50-0: ULTRASHIELD DTM Semi -Gloss Paint
ULGM00-0: ULTRASHIELD Galvanized Metal Primer
ULMS00-0: ULTRASHIELD Multi -Surface Primer
ULSB10-0: ULTRA -SCRUB Flat
ULSH40-0: ULTRASHIELD Low Sheen Paint
ULSH60-0: ULTRASHIELD Gloss Paint
VNPL00-0: VINYLASTIC Plus
VNPROO-1: VINLYLASTIC Premium Ultra -Low VOC
VNSLOO-1: VINYLASTIC Select Zero VOC
W 350: Interior W/B Acrylic Clear Finish
W 360V: ENDURASEAL
W 370: ENDURAWALL
W 615: ACOUSTIKOTE
W 2456V: Latex Roof Coating
W 5361: Athletic Field Striping Paint
W 6139: Acrylic Elastomeric Coating AZ
W 6160E: VERSAGLO
W 6220E: VERSAGLOSS
W 6230E: VERSAWALL
W 6240: VERSAFLAT
W 6250E: VERSASATIN
09/23/19
SAFETY DATA SHEET
FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
SDS DATE: 09/23/2019
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT IDENTIFICATION:
SEE COVER PAGE FOR LIST OF PRODUCTS COVERED
MANUFACTURER: DUNN-EDWARDS CORPORATION
4885 EAST 52ND PLACE
LOS ANGELES, CA 90058-5507
PRODUCT TYPE: WATERBORNE PAINT
RECOMMENDED USE: ARCHITECTURAL COATING EMERGENCY PHONE: 1-800-222-1222
OTHER CALLS: (323) 826-2663
HMIS CODES: H F R PP FAX NUMBER: (323) 771-1611
0 0 0 E
THE #1 CHOICE OF
PAINTING PROFESSIONALS'
SECTION 2: HAZARDS IDENTIFICATION
GHS CLASSIFICATION: NOT A HAZARDOUS SUBSTANCE OR MIXTURE
GHS LABEL ELEMENTS: [NOTE: THIS CONSUMER PRODUCT IS EXEMPT FROM OSHA GHS-HCS LABELING REQUIREMENTS.]
SIGNAL WORD: (NONE REQUIRED) HAZARD STATEMENT: (NONE REQUIRED)
PICTOGRAM: (NONE REQUIRED)
PRECAUTIONARY STATEMENTS:
PREVENTION: DO NOT INGEST. USE ONLY WITH ADEQUATE VENTILATION. AVOID BREATHING VAPORS,
SPRAY MIST AND SANDING DUST. WEAR APPROPRIATE NIOSH-APPROVED RESPIRATORY
PROTECTION WHEN SPRAYING OR SANDING. AVOID CONTACT WITH SKIN AND EYES.
CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN.
RESPONSE: CLEAN UP SPILLS WITH INERT ABSORBENT MATERIAL, SUCH AS CLAY GRANULES, PAPER
OR CLOTH WIPES. ALLOW TO DRY BEFORE DISPOSAL.
STORAGE & DISPOSAL: KEEP BETWEEN 40°F AND 110°F AT ALL TIMES. DISPOSE OF CONTAINER AND CONTENTS
IN ACCORDANCE WITH APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.
HAZARDS NOT OTHERWISE CLASSIFIED: NONE.
SECTION 3: COMPOSITION I INFORMATION ON INGREDIENTS
HAZARDOUS INGREDIENTS:
CHEMICAL NAME COMMON NAME / SYNONYMS CAS NUMBER CONCENTRATION (%WT)
NO REPORTABLE HAZARDOUS INGREDIENTS.
NOTE: EXPOSURES TO POSSIBLE HAZARDOUS INGREDIENTS BELOW REPORTING THRESHOLDS CAN BE MINIMIZED
OR AVOIDED BY FOLLOWING RECOMMENDED PROCEDURES FOR SAFE HANDLING, STORAGE, DISPOSAL, AND USE.
PAGE 1 OF 5
SAFETY DATA SHEET
FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
SDS DATE: 09/23/2019
SECTION 4: FIRST -AID MEASURES
EYES:
SKIN:
INGESTION:
INHALATION:
FLUSH EYES WITH FRESH WATER FOR AT LEAST 15 MINUTES.
WASH THOROUGHLY WITH SOAP AND WATER.
HAVE VICTIM DRINK 1 OR 2 GLASSES OF WATER TO ENSURE DILUTION.
MOVE VICTIM TO FRESH AIR.
MOST IMPORTANT SYMPTOMS AND EFFECTS:
NOTES TO FIRST AID PROVIDERS:
MAY CAUSE MILD IRRITATION TO SKIN AND EYES, GASTROINTESTINAL
AND RESPIRATORY TRACTS. SLIGHT DIZZINESS, NAUSEA AND
HEADACHE POSSIBLE.
CALL FOR MEDICAL ASSISTANCE IF SYMPTOMS PERSIST.
SECTION 5: FIRE -FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA:
UNUSUAL FIRE AND EXPLOSION HAZARDS:
HAZARDOUS COMBUSTION PRODUCTS:
SPECIAL EQUIPMENT & PRECAUTIONS:
FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
LIQUID MATERIAL IS NON-COMBUSTIBLE, BUT DRIED FILMS ARE CAPABLE OF
SUPPORTING COMBUSTION WHEN IN CONTACT WITH OPEN FLAMES. CLOSED
CONTAINERS CAN DEVELOP INTERNAL PRESSURE AND MAY RUPTURE WHEN
SUBJECTED TO EXTREME HEAT.
COMBUSTION CAN PRODUCE CARBON MONOXIDE AND/OR CARBON DIOXIDE.
USE SELF-CONTAINED BREATHING APPARATUS IN CONFINED SPACES. OBSERVE
RECOMMENDED PROCEDURES FOR HANDLING ORDINARY COMBUSTIBLE
MATERIALS.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE
EQUIPMENT, EMERGENCY PROCEDURES: WEAR WATERPROOF GLOVES TO AVOID SKIN CONTACT. KEEP CHILDREN AND
PETS AWAY FROM SPILLED LIQUID. PREVENT LIQUID FROM ENTERING DRAINS.
METHODS AND MATERIALS FOR
CONTAINMENT AND CLEAN UP:
DIKE SPILLED LIQUID WITH INERT MATERIAL, SUCH AS CLAY GRANULES. SCOOP
UP EXCESS LIQUID AND POUR INTO CONTAINER. USE PAPER OR CLOTH WIPES
TO CLEAN UP SMALL SPILLS. ALLOW TO DRY BEFORE DISPOSAL.
SECTION 7: HANDLING AND STORAGE
SAFE HANDLING PRECAUTIONS: KEEP CONTAINERS CLOSED WHEN NOT IN USE. DO NOT STACK CONTAINERS MORE THAN
THREE HIGH. SECURE LOADS AGAINST SHIFTING DURING TRANSPORTATION. USE ONLY
AN APPROPRIATE TOOL TO OPEN CONTAINERS.
SAFE STORAGE CONDITIONS: STORE IN COOL, WELL -VENTILATED AREA. MAINTAIN TEMPERATURE BETWEEN 40°F AND
110°F. AVOID EXPOSURE TO DIRECT SUNLIGHT, HEAT OR FLAME. INSPECT CONTAINERS
FOR LEAKS PERIODICALLY. ROTATE STOCK, USE OLDER MATERIAL FIRST.
INCOMPATIBILITIES: DO NOT HANDLE OR STORE NEAR WATER -REACTIVE MATERIALS, STRONG OXIDIZERS,
ACIDS OR ALKALIS.
PAGE 2 OF 5
SAFETY DATA SHEET
FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
SDS DATE: 09/23/2019
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
HAZARDOUS INGREDIENTS
ACGIH OSHA EXPOSURE LIMITS
TLV/TWA TWA STEL VAPOR PRESS
CAS NUMBER %\ PPM PPM MG/M' PPM MG/M' mmHQ A TEMP
NO REPORTABLE HAZARDOUS INGREDIENTS.
ENGINEERING CONTROLS:
VENTILATION :
RESPIRATORY PROTECTION:
EYE PROTECTION:
SKIN PROTECTION:
OTHER PROTECTIVE CLOTHING 0
WORK HYGIENIC PRACTICES:
USE SIGNS OR BARRIERS TO RESTRICT ACCESS TO PAINTING WORK AREA.
NORMAL AIR CIRCULATION SHOULD BE SUFFICIENT; OTHERWISE, USE PORTABLE FANS.
ENSURE ADEQUATE VENTILATION DURING APPLICATION, DRYING AND CURING OF PAINT.
FOR SPRAY APPLICATION, USE A NIOSH-APPROVED PARTICULATE FILTER MASK (N95 OR
HIGHER) TO AVOID BREATHING SPRAY MIST. EXPOSED PERSONS WITH ALLERGIES OR
ASTHMA MAY NEED AN ORGANIC VAPOR/PARTICULATE RESPIRATOR (NIOSH/MSHA TC 23C
OR EQUIVALENT).
WHEN SANDING, SCRAPING, OR ENGAGING IN ANY ACTIVITY THAT GENERATES AIRBORNE
NUISANCE DUST, WEAR A NIOSH-APPROVED PARTICULATE FILTER MASK (N95 OR
HIGHER) TO AVOID BREATHING DUST. FINISH BY WATER -WASHING ALL SURFACES TO
REMOVE DUST.
USE SAFETY GLASSES, GOGGLES, OR FACE SHIELD TO PROTECT EYES.
USE WATERPROOF GLOVES (LATEX, VINYL, RUBBER, OR NEOPRENE) TO AVOID SKIN
CONTACT.
R EQUIPMENT: WATERPROOF HEADCOVERING AND GENERAL PROTECTIVE CLOTHING
ARE RECOMMENDED FOR PROTECTION AS NECESSARY.
WASH HANDS AND FACE BEFORE EATING OR DRINKING.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
ODOR:
ODOR THRESHOLD:
pH AS SUPPLIED:
FREEZING POINT:
BOILING POINT:
FLASH POINT:
EVAPORATION RATE:
FLAMMABILITY:
UPPER EXPLOSIVE LIMIT:
LOWER EXPLOSIVE LIMIT
OPAQUE LIQUID DISPERSION
VERY MILD ODOR
(NO INFORMATION AVAILABLE)
-8.5
0° C / 32° F
100°C/212°F
(NOT APPLICABLE)
SAME AS WATER
(NOT APPLICABLE)
(NOT APPLICABLE)
(NOT APPLICABLE)
VAPOR PRESSURE:
VAPOR DENSITY:
SPECIFIC GRAVITY:
SOLUBILITY IN WATER:
PARTITION COEFFICIENT
AUTO -IGNITION TEMP:
DECOMPOSTION TEMP:
VISCOSITY:
PERCENT SOLIDS:
PERCENT VOLATILE:
PAGE 3 OF 5
SAME AS WATER VAPOR
SAME AS WATER VAPOR
-1.4 (H20 = 1)
PARTLY SOLUBLE
(NO INFORMATION AVAILABLE)
(NOT APPLICABLE)
(NO INFORMATION AVAILABLE)
85-115KU
BY VOL: -35%
BY VOL: -65%
BY WT: -50%
BY WT: -50%
SAFETY DATA SHEET
FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
SDS DATE: 09/23/2019
SECTION 10: STABILITY AND REACTIVITY
REACTIVITY:
CHEMICAL STABILITY:
POSSIBILITY OF HAZARDOUS REACTIONS:
CONDITIONS TO AVOID:
INCOMPATIBLE MATERIALS:
HAZARDOUS DECOMPOSITION PRODUCTS
REACTIVITY NOT KNOWN TO OCCUR UNDER NORMAL CONDITIONS.
STABLE UNDER NORMAL CONDITIONS.
POLYMERIZATION WILL NOT OCCUR.
AVOID STORAGE AT TEMPERATURES BELOW 40° F OR ABOVE 110° F.
AVOID WATER -REACTIVE MATERIALS, STRONG OXIDIZERS, ACIDS AND ALKALIS.
COMBUSTION CAN PRODUCE CARBON MONOXIDE AND/OR CARBON DIOXIDE.
SECTION 11: TOXICOLOGICAL INFORMATION
LIKELY ROUTES OF EXPOSURE:
SYMPTOMS OF OVEREXPOSURE:
DELAYED OR CHRONIC EFFECTS:
NUMERICAL MEASURES OF TOXICITY:
CARCINOGENICITY:
HAZARDOUS BY-PRODUCTS:
INHALATION, INGESTION, EYE AND SKIN CONTACT
MAY CAUSE MILD IRRITATION TO SKIN AND EYES, GASTROINTESTINAL AND
RESPIRATORY TRACTS. SLIGHT DIZZINESS, NAUSEA AND HEADACHE POSSIBLE.
AVAILABLE INFORMATION PROVIDES NO EVIDENCE OF DELAYED OR CHRONIC
HEALTH EFFECTS ASSOCIATED WITH EXPOSURE TO THIS PRODUCT DURING
NORMAL USE WITH RECOMMENDED PERSONAL PROTECTION AS NEEDED.
(NO INFORMATION AVAILABLE)
NTP? NO.
IARC? NO. OSHA? NO.
PROP 65? NO.
SPRAY APPLICATION OF THIS PRODUCT CAN GENERATE SPRAY MIST, WHICH
MAY BE HAZARDOUS TO YOUR HEALTH IF INHALED. RISK DEPENDS ON LEVEL
AND DURATION OF EXPOSURE.
SANDING, SCRAPING, OR OTHERWISE DISTURBING THE DRY FILM OF THIS
PRODUCT CAN GENERATE AIRBORNE NUISANCE DUST, WHICH MAY BE
HAZARDOUS TO YOUR HEALTH IF INHALED. RISK DEPENDS ON LEVEL AND
DURATION OF EXPOSURE.
SEE SECTION 8: "EXPOSURE CONTROLS / PERSONAL PROTECTION" FOR
INFORMATION ON RESPIRATORY PROTECTION WHEN SPRAYING OR SANDING.
SECTION 12: ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION:
(NO INFORMATION AVAILABLE)
SECTION 13: DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD:
RCRA HAZARD CLASS:
COLLECT SPILLED MATERIAL, USED ABSORBENT MATERIAL AND WIPES INTO A SUITABLE
CONTAINER AND DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE, AND
FEDERAL REGULATIONS. DRY, EMPTY CONTAINERS MAY BE RECYCLED OR DISPOSED OF
AS ORDINARY TRASH.
NON -HAZARDOUS
PAGE 4 OF 5
SAFETY DATA SHEET
FORM A: COATINGS WITH NO REPORTABLE HAZARDOUS INGREDIENTS
SDS DATE: 09/23/2019
SECTION 14: TRANSPORT INFORMATION
THIS MATERIAL IS NOT SUBJECT TO DOT, IATA/ICAO, OR IMO/IMDG TRANSPORTATION REGULATIONS.
ACCEPTABLE FOR AIR TRANSPORT AS NON -HAZARDOUS GOODS.
UN NUMBER: (NOT APPLICABLE) UN PROPER SHIPPING NAME: (NOT APPLICABLE)
TRANSPORT HAZARD CLASS: (NOT APPLICABLE) PACKING GROUP: (NOT APPLICABLE)
ENVIRONMENTAL HAZARDS: (NOT APPLICABLE) TRANSPORT IN BULK: (NOT APPLICABLE)
SPECIAL PRECAUTIONS: FOLLOW RECOMMENDED PROCEDURES FOR SAFE HANDLING AND STORAGE.
SECTION 15: REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
TSCA: ALL COMPONENTS ARE LISTED IN TSCA INVENTORY OR EXEMPT.
CERCLA: NOT LISTED AS A HAZARDOUS SUBSTANCE.
SARA TITLE 111: NOT LISTED AS A HAZARDOUS SUBSTANCE.
311/312 HAZARD CATEGORIES: (NOT APPLICABLE)
313 REPORTABLE INGREDIENTS: (NOT APPLICABLE)
STATE REGULATIONS: (NOT APPLICABLE)
SECTION 16: OTHER INFORMATION
DATE OF PREPARATION: SEPTEMBER 23, 2019
PREPARER INFORMATION:
DUNN-EDWARDS CORPORATION
ENVIRONMENTAL AFFAIRS DEPARTMENT
PHONE: (323) 826-2663
DISCLAIMER: THE INFORMATION CONVEYED ABOVE, ALTHOUGH OBTAINED FROM SOURCES WE CONSIDER RELIABLE, IS
FURNISHED BY DUNN-EDWARDS CORPORATION WITHOUT ANY WARRANTY (WHETHER EXPRESS OR
IMPLIED) AS TO ITS ACCURACY, ADEQUACY, OR APPLICABILITY TO ANY PARTICULAR NEEDS OR
CIRCUMSTANCES.
PAGE 5 OF 5
RECEIVED
'Ili!.NC.; rV.1 DEPT.
JAI' -q P 5: 42
;° OF NATIONAL CITY
PROJECT PROFESSIONALS CORPORATION
TRANSMITTAL COVER
To: National City Engineering Department
Project Name: Paradise Creek Park Phase III
CIP No.: 18-07
ITEMS DELIVERED:
Change Order #19
Invoice #13
Delivered by: !moo4L--project Professionals Corporation
Received by:
Date:
i
3�y h�R'bkATu, A�
CITY OF NATIONAL CITY
Office of the City Clerk
1243 National City Blvd., National City, California 91950-4397
619-336-4228
Michael R. Dalla, CMC - City Clerk
WHILLOCK CONTRACTING
Paradise Creek Park Site Remediation & Improvements, CIP No. 18-07
Change Order #19
Judith Hernandez (Engineering/Public Works) forwarded a copy of the
Change Order to Whillock Contracting.